Using Your Phone, Power Failure Operation | Radio Shack 43-3872

Using Your Phone

Ô NOTE Ô

If the line is in use by another handset(s) or the base "Line In Use" appears in the display of all registered handset’s or the base’s that are not in use.

USING YOUR PHONE

POWER FAILURE OPERATION

Because the 43-3872 is a corded/cordless combination phone, it can still perform several of its functions during a power failure. The following features will function even during a power failure.

--Making and receiving calls with the corded handset

--Redialing the last number redialed.

--Adjusting the volume on the main base

--Call waiting feature on the main base

--DirectLink mode

All other features are disabled during a power failure.

MAKING A CALL

From the handset

1.Remove the handset from the cradle. Ô

2.Press TALK/FLASH.

3.Listen for the dial tone.

4.Dial the number.

OR

1.Remove the handset from the cradle.

2.Dial the number.

If pause is required, press REDIAL/ PAUSE. P appears in the display, which represents a pause

3.Press TALK/FLASH.

28

Image 28

Radio Shack 43-3872 manual Using Your Phone, Power Failure Operation, Making a Call, From the handset

Contents

4GHz Expandable Corded/Cordless Phone Answerer Contents Introduction Information FCC Statement Important Information Surge Protection Important Safety Instructions Read this Before Installation Important Caller ID Information Installation Selecting a Location On a Desk Top You must use On a Wall Plate or Wall Using AC Power CONNECTING/CHARGING the Battery Pack Recharging the Battery Pack Installing the Beltclip Using a HeadsetTo attach the beltclip To remove the beltclip Example of the standby mode display Handset Display and Icons Soft KEY Functions Base 570# Setting Menu Options Using the Interface DirectLink Mode Using DirectLink Mode Handset onlyUsing Room/Monitor Room/Baby Monitor Handset Setup/Base Setup Selecting a Ringer Tone Distinctive Ringer Setup Setting the Anykey Answer Handset only Selecting a Language Setting the Key Touch Tone Setting Day and Time Global SetupSetting Cidcw Caller ID on Call Waiting Setting the Area Code Setting the Dial Mode System Reset Handset only De-register the Handset Place handset on main base Handset Registration Using Your Phone Power Failure OperationMaking a Call From the handset From the Handset Speakerphone Receiving a CallFrom the base Hanging UP Switching to Speakerphone During a CallCall Waiting Placing a Call on Hold Redialing Ringer volume Earpiece and Speaker VolumeAdjusting the RINGER, Earpiece and Speaker Volume Audio Tones Base only Temporarily Muting the Ringer Do Not Disturb DNDMuting the Ringer Tone Dialing SWITCH-OVER Mute Microphone Traveling OUT Range Booster Handset Only Conferencing Privacy ModeJoining a Conference Call Speed Dialing Find HandsetFrom a second handset Phonebook Phonebook If you make a mistake while entering a name Store/Edit No. appears Storing Caller ID Messages in the Phonebook Storing a Redial Record Deleting a Redial Record Viewing the Phonebook Making Calls Using the Phonebook From Standby Mode Deleting ALL Phonebook Locations Base only From the handset Copying Phonebook Locations Testing Stored Emergency Number From the base Caller ID and Cidcw Caller ID on Call Waiting Incomplete Data Call Waiting Deluxe Features Viewing the Caller ID List Deleting Information from the Caller ID List Deleting ALL Caller ID NAME/NUMBERS From Talk mode From Standby ModeCalling a Party from the Caller ID List Four Multi-Handset Expandability Expanding Your PhoneRegister the Handset to the Base Using the Directlink Mode DirectLink call INTERCOM/CALL Transfer Feature IntercomFOUR-WAY Conferencing Making an Intercom From a handset Call Transfer Feature Answering an Intercom Answering a Call Transfer To answer a page from a handset Accepting the call transfer To answer a page from the base Features Integrated Answering Device Record a Personal Outgoing Message Base Only Answering System SetupSelecting Your Greeting Base only Setting a PIN Code Setting the Ring Time Setting the Record Time Setting the Message Alert On or Off Setting the Language of your Answering System Setting the Call ScreenTurning the message alert tone off by pressing any key Turning the message alert tone off from a remote location Using Your Answering System Turning the Answering System ON/OFF Playing your messages New Message LEDRepeating a message Skipping a message Deleting a message Voice memo Recording a conversation Remote access away from home Remote Operation Function Remote Key Function Remote access with the handsetAnsweringMachine operation appears on the base Integrated Answering Device Troubleshooting Symptom Suggestion Keep the handset away from microwave ovens Service and Repair Care Memo RadioShack Corporation