Siemens S223 Source Port of Statistical Data, Subject of Rmon History, Number of Sample Data

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

want to list available commands.

The following is an example of listing available commands on RMON Configuration mode.

SWITCH(config-rmonhistory[5])# ?
RMON history configuration commands:
active	Activate the history
data-source	Set data source port
do	To run exec commands	in config mode
exit	End current mode and	down to previous mode
help	Description of the interactive help system
interval	Define the time interval for the history
owner	Assign the owner who	define and is using the history
	resources
requested-buckets	Define the bucket count for the interval
show	Show running system information
SWITCH(config-rmonhistory[5])#

7.4.1.1Source Port of Statistical Data

To specify a source port of statistical data, use the following command.

Command	Mode	Description
data-source NAME	RMON	Specifies a data object ID.
		NAME: enters a data object ID. (ex. ifindex.n1/port1)

7.4.1.2Subject of RMON History

To identify subject using RMON history, use the following command.

Command	Mode	Description
owner NAME	RMON	Identifies subject using related data, enter the name
		(max. 32 characters).

7.4.1.3Number of Sample Data

To configure the number of sample data of RMON history, use the following command.

Command	Mode	Description
		Defines a bucket count for the interval, enter the num-
requested-buckets <1-65535>	RMON	ber of buckets.
		1-65535: bucket number (default: 50)

7.4.1.4Interval of Sample Inquiry

To configure the interval of sample inquiry in terms of second, use the following command.

Command	Mode	Description
interval <1-3600>	RMON	Defines the time interval for the history (in seconds),
		enter the value. (default: 1800)

A50010-Y3-C150-2-7619 127