User Manual

UMN:CLI

SURPASS hiD 6615 S223/S323 R1.5

 

 

 

 

 

4.1.8.2Auto System Rebooting

The hiD 6615 S223/S323 reboots the system according to user’s configuration. There are two basises for system rebooting. These are CPU and memory. CPU is rebooted in case CPU Load or Interrupt Load continues for the configured time. Memory is automatically rebooted in case memory low occurs as the configured times.

To enable auto system rebooting function, use the following command.

Command

Mode

Description

 

 

 

 

 

Configure to reboot the system automatically in case

 

 

an average of CPU or interrupt load exceeds the con-

auto-reset cpu <50-100> <1-100>

 

figured value during the user-defined time.

TIME

 

50-100: average of CPU load per 1 minute

 

 

1-100: average of interrupt load

 

Bridge

TIME: minute

 

 

 

 

Configure to reboot the system automatically in case

auto-reset memory <1-120> <1-

 

memory low occurs as the configured value.

10>

 

1-120: time of memory low

 

 

1-10: count of memory low(The default is 5)

 

 

 

no auto-reset {cpu memory}

 

Disables auto system rebooting.

 

 

 

To show auto system rebooting configuration, use the following command.

Command

Mode

Description

 

 

 

show auto-reset {cpu memory}

Global/

Shows a configuration of auto-rebooting function.

Bridge

 

 

 

 

 

The following is an example of configuring auto-restarting function in case CPU load or Interrupt load maintains over 70% during 60 seconds and viewing the configuration.

SWITCH(config)#

SWITCH(bridge)# auto-reset cpu 70 70 1

SWITCH(bridge)#

show auto-reset cpu

------------------------------

Auto-Reset Configuration(CPU)

------------------------------

auto-reset:

 

on

cpu load:

 

70

interrupt load:

 

70

continuation time:

1

SWITCH(bridge)#

 

 

4.2System Authentication

For the enhanced system security, the hiD 6615 S223/S323 provides two authentication methods to access the switch using Remote Authentication Dial-In User Service (RA- DIUS) and Terminal Access Controller Access Control System Plus (TACACS+).

A50010-Y3-C150-2-7619

49

Page 49
Image 49
Siemens S223, S323 System Authentication, Auto System Rebooting, Auto-reset memory 1-120, No auto-reset cpu memory