Siemens S323, S223 IP Address Family, Restart Time, Stalepath Time, 324 A50010-Y3-C150-2-7619

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

•Restart Time

It’s the waiting time for the restarting of Neighboring router’s BGP process. Restart time allows BGP process time to restart and implement the internal connection (The session). However, if it’s not working properly, it is considered as the router stops op- erating.

•Stalepath Time

After BGP process of Neighboring router is restarted, it holds the time until BGP up dates the path information. In case that the information of BGP routes is not updated until the stalepath time, the switch discards this BGP routes information.

To set restart time or stalepath time on Graceful Restarting algorithm, use the following command.

Command		Mode	Description
bgp graceful-restart restart-time			Sets the restart time of Graceful Restart configuration
			in the unit of second.
<1-3600>
			1-3600: restart time (default: 120)
		Router
bgp graceful-restart	stalepath-		Sets the stalepath-time of Graceful Restart configura-
			tion in the unit of second.
time <1-3600>
			1-3600: stalepath time (default: 30)

If you don’t use Graceful Restart feature or want to return the default value for restart time or stalepath time, use the following command.

Command		Mode	Description
no bgp graceful-restart restart-			Restores the default value for restart time.
time [<1-3600>]
		Router
no bgp graceful-restart	sta-		Restores the default value for stalepath time.
lepath-time [<1-3600>]

10.1.3IP Address Family

The hiD 6615 S323 recently supports both unicast and multicast as address-family. Use the following command in choosing either unicast or multicast to enter the Address- Family Configuration mode allowing configuration of address-family specific parameters.

Use the following command in order to enable address family routing process, which open you in Address-Family Configuration mode.

Command	Mode	Description
address-family ipv4 [multicast	Router	Opens the Address-Family Configuration mode to con-
unicast]		figure sessions for IP v4 prefixes.
exit-address-family	Address-	Exits to Router Configuration mode.
	Family

324 A50010-Y3-C150-2-7619