Siemens S223, S323 user manual Bandwidth, Following is an example of configuration to bandwidth as

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

8.6.2Sample Configuration

The following is an example of showing the configuration after limiting the number of packets transmitted to the port number 1 as 10,000.

SWITCH(bridge)# mac-flood-guard1 10000

SWITCH(bridge)# show mac-flood-guard

---------------------------------

Port Rate(fps) Port Rate(fps)

----------------+----------------

1	10000	2	Unlimited
3	Unlimited	4	Unlimited
5	Unlimited	6	Unlimited
7	Unlimited	8	Unlimited
9	Unlimited	10	Unlimited
11	Unlimited	12	Unlimited
13	Unlimited	14	Unlimited

15 Unlimited 16 Unlimited (Omitted)

SWITCH(bridge)#

8.7Bandwidth

Routing protocol uses bandwidth information to measure routing distance value. To con- figure bandwidth of interface, use the following command.

Command	Mode	Description
bandwidth BANDWIDTH	Interface	Configures bandwidth of interface, enter the value of
		bandwidth.

i

The bandwidth can be from 1 to 10,000,000 Kbits. This bandwidth is for routing informa- tion implement and it does not concern physical bandwidth.

To delete a configured bandwidth, use the following command.

Command	Mode	Description
no bandwidth BANDWIDTH	Interface	Deletes configured bandwidth of interface, enter the
		value.

The following is an example of configuration to bandwidth as 1000.

SWITCH(config-if)# bandwidth 1000 SWITCH(config-if)# show running-config interface 1

!

interface default bandwidth 1m

ip address 10.27.41.181/24

!

SWITCH(config-if)#

A50010-Y3-C150-2-7619 237