Siemens S323, S223 user manual SWITCH# show list

UMN:CLI			User Manual
			SURPASS hiD 6615 S223/S323 R1.5
	Command	Mode	Description
	privilege rmon-alarm level
	<0-15> {COMMAND all}		Uses the specific command of RMON Configuration
			mode in the level.
	privilege rmon-event level
	<0-15> {COMMAND all}
	privilege rmon-history level		Uses the specific command of RMON Configuration
	<0-15> {COMMAND all}		mode in the level.
	privilege route-map level	Global	Uses the specific command of Route-map Configura-
	<0-15> {COMMAND all}		tion mode in the level.
	privilege rule level <0-15>		Uses the specific command of Rule Configuration mode
	{COMMAND all}		in the level.
	privilege view level <0-15>		Uses the specific command of User EXEC mode in the
	{COMMAND all}		level.
	privilege vrrp level <0-15>		Uses the specific command of VRRP Configuration
	{COMMAND all}		mode in the level.

The commands that are used in low level can be also used in the higher level. For exam- ple, the command in level 0 can be used in from level 0 to level 14.

The commands should be input same as the displayed commands by show list. There- fore, it is not possible to input the commands in the bracket separately.

SWITCH# show list

clear arp-inspection mapping counter clear arp-inspection statistics clear cpu statistics (PORTS) clear ip bgp *

clear ip bgp * in

clear ip bgp * in prefix-filter

clear ip bgp * ipv4 (unicastmulticast) in

clear ip bgp * ipv4 (unicastmulticast) in prefix-filter clear ip bgp * ipv4 (unicastmulticast) out

clear ip bgp * ipv4 (unicastmulticast) soft clear ip bgp * ipv4 (unicastmulticast) soft in clear ip bgp * ipv4 (unicastmulticast) soft out clear ip bgp * out

clear ip bgp * soft clear ip bgp * soft in clear ip bgp * soft out

clear ip bgp * vpnv4 unicast in clear ip bgp * vpnv4 unicast out

--More-- (Omitted)

It is not possible to input clear ip bgp * ipv4 unicast in. You should input like clear ip bgp * ipv4 {unicast multicast} in.

The commands starting with the same character are applied by inputting only the starting commands. For example, if you input show, all the commands starting with show are applied.

44 A50010-Y3-C150-2-7619