Siemens S323, S223 user manual Activating Rmon History, Deleting Configuration of Rmon History

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

i

1 sec is the minimum time which can be selected. But the minimum sampling interval currently is 30 sec, i.e., all intervals will be round up to a multiple of 30 seconds.

7.4.1.5Activating RMON History

To activate RMON history, use the following command.

Command	Mode	Description
active	RMON	Activates RMON history.

i

Before activating RMON history, check if your configuration is correct. After RMON history is activated, you cannot change its configuration. If you need to change configuration, you need to delete the RMON history and configure it again.

7.4.1.6Deleting Configuration of RMON History

When you need to change a configuration of RMON history, you should delete an existing RMON history.

To delete RMON history, use the following command.

Command	Mode	Description
no rmon-history <1-65535>	RMON	Deletes RMON history of specified number, enter the
		value for deleting.

7.4.1.7Displaying RMON History

To display RMON history, use the following command.

Command		Mode	Description
show running-config	rmon-	All	Shows a configured RMON history.
history

i

Always the last values will be displayed but no more than the number of the granted buckets.

The following is an example of displaying RMON history.

SWITCH(config-rmonhistory [5])# show running-configrmon-history

!

rmon-history 5 owner test

data-source ifindex.hdlc1 interval 60 requested-buckets 25 active

!

SWITCH(config-rmonhistory [5])#

128 A50010-Y3-C150-2-7619