Siemens S323, S223 user manual Authentication Interface, Primary Authentication Method

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

4.2.1Authentication Method

To set the system authentication method, use the following command.

Command		Mode	Description
			Set the system authentication method.
			local: authentication for console access
login {local remote}	{radius		remote: authentication for telnet access
			radius: selects RADIUS authentication.
tacacs host all} enable
		Global	tacacs: selects TACACS+ authentication.
			host: selects nominal system authentication (default).
			all: selects all the authentication methods.
login {local remote}	{radius		Disables a configured system authentication method.
tacacs host all} disable

4.2.2Authentication Interface

If more than 2 interfaces are specified to the hiD 6615 S223/S323, you can designate one specific interface to access RADIUS or TACACS server.

To designate an authentication interface, use the following command.

Command	Mode	Description
		Designates an authentication interface.
login {radius tacacs} interface		radius: selects RADIUS authentication.
	Global	tacacs: selects TACACS+ authentication.
INTERFACE [A.B.C.D]
		INTERFACE: interface name
		A.B.C.D: IP address (optional)

4.2.3Primary Authentication Method

You can set the order of the authentication method with giving the priority to each authen- tication method. To set the primary authentication method, use the following command

Command	Mode	Description
		Set the primary authentication method.
		local: authentication for console access
login {local remote} {radius	Global	remote: authentication for telnet access
tacacs host} primary		radius: selects RADIUS authentication.
		tacacs: selects TACACS+ authentication.
		host: selects nominal system authentication (default).

50 A50010-Y3-C150-2-7619