Cisco Systems C819GUK9, C819HG4GVK9 6-14, Configuring Backup Data Lines and Remote Management

Chapter 6 Configuring Backup Data Lines and Remote Management

Configuring Dial Backup and Remote Management Through the Console Port

!Dial backup and remote management physical interface. interface Async1

no ip address encapsulation ppp dialer in-band dialer pool-member 3 async default routing async dynamic routing async mode dedicated

ppp authentication pap callin

!

interface ATM0 mtu 1492

no ip address

no atm ilmi-keepalive pvc 0/35

pppoe-client dial-pool-number 1

!

!Primary WAN link. interface Dialer1

ip address negotiated ip nat outside encapsulation ppp

dialer pool 1

ppp authentication pap callin

ppppap sent-username account password 7 pass ppp ipcp dns request

ppp ipcp wins request ppp ipcp mask request

!

!Dialer backup logical interface. interface Dialer3

ip address negotiated ip nat outside

encapsulation ppp no ip route-cache

no ip mroute-cache dialer pool 3

dialer idle-timeout 60

dialer string 5555102 modem-script Dialout dialer watch-group 1

!Remote management PC IP address.

peer default ip address 192.168.2.2 no cdp enable

!

!Need to use your own ISP account and password. ppp pap sent-username account password 7 pass

ppp ipcp dns request ppp ipcp wins request

ppp ipcp mask request

!IP NAT over Dialer interface using route-map.

ip nat inside source route-map main interface Dialer1 overload

ip nat inside source route-map secondary interface Dialer3 overload ip classless

!

!When primary link is up again, distance 50 will override 80 if dial backup

!has not timed out. Use multiple routes because peer IP addresses are alternated

!among them when the CPE is connected.

ip route 0.0.0.0 0.0.0.0 64.161.31.254 50 ip route 0.0.0.0 0.0.0.0 66.125.91.254 50 ip route 0.0.0.0 0.0.0.0 64.174.91.254 50 ip route 0.0.0.0 0.0.0.0 63.203.35.136 80

	Cisco 819 Series Integrated Services Routers Software Configuration Guide
6-14	OL-23590-02