Cisco Systems C819GUK9 Data Account Provisioning, Configuring a GSM Modem Data Profile, page

Chapter 5 Basic Router Configuration

Configuring WAN Interfaces

Data Account Provisioning

Note To provision your modem, you must have an active wireless account with a service provider. A SIM card must be installed in a GSM 3G wireless card.

To provision your data account, follow these procedures:

•Verifying Signal Strength and Service Availability, page 5-12

•Configuring a GSM Modem Data Profile, page 5-13

•CDMA Modem Activation and Provisioning, page 5-14

Verifying Signal Strength and Service Availability

To verify the signal strength and service availability on your modem, use the following commands in privileged EXEC mode.

SUMMARY STEPS

1.show cellular 0 network

2.show cellular 0 hardware

3.show cellular 0 connection

4.show cellular 0 gps

5.show cellular 0 radio

6.show cellular 0 profile

7.show cellular 0 security

8.show cellular 0 sms

9.show cellular 0 all

DETAILED STEPS

	Command or Action			Purpose
Step 1	show cellular 0 network			Displays information about the carrier network, cell
				site, and available service.
	Example:
	Router# show cellular 0		network
Step 2	show cellular 0 hardware			Displays the cellular modem hardware information.
	Example:
	Router# show cellular 0		hardware
Step 3	show cellular 0 connection			Displays the current active connection state and data
				statistics.
	Example:
	Router# show cellular 0		connection
		Cisco 819 Series Integrated Services Router Software Configuration Guide
5-12				OL-23590-02