Chapter 5 Basic Router Configuration
Information Needed for Configuration
speed auto interface FastEthernet0 interface FastEthernet1 interface FastEthernet2 interface FastEthernet3 interface Serial0
no ip address shutdown
no
!
interface Vlan1
no ip address
!
ip
no ip http
logging esm config
no modem enable line aux 0 line 3
no exec line 7
stopbits 1 speed 115200
line vty 0 4 login
transport input all
!
scheduler allocate 20000 1000 end
Information Needed for Configuration
You need to gather some or all of the following information, depending on your planned network scenario, before configuring your network:
•If you are setting up an Internet connection, gather the following information:
–PPP client name that is assigned as your login name
–PPP authentication type: Challenge Handshake Authentication Protocol (CHAP) or Password Authentication Protocol (PAP)
–PPP password to access your Internet service provider (ISP) account
–DNS server IP address and default gateways
•If you are setting up a connection to a corporate network, you and the network administrator must generate and share the following information for the WAN interfaces of the routers:
–PPP authentication type: CHAP or PAP
–PPP client name to access the router
–PPP password to access the router
Cisco 819 Series Integrated Services Router Software Configuration Guide
|
| ||
|
|
