Appendix C ROM Monitor
Disaster Recovery with TFTP Download
TFTP Download Command Variables
This section describes the system variables that can be set in ROM monitor mode and that are used during the TFTP download process. There are both required variables and optional variables.
Note The commands described in this section are case sensitive and must be entered exactly as shown.
Required Variables
These variables must be set with these commands before you use the tftpdnld command:
Variable | Command |
|
|
WAN GE setting | FE_PORT=4 |
|
|
Switch port setting | |
|
|
IP address of the router | IP_ADDRESS=ip_address |
|
|
Subnet mask of the router | IP_SUBNET_MASK=ip_address |
|
|
IP address of the default gateway of the router | DEFAULT_GATEWAY=ip_address |
|
|
IP address of the TFTP server from which the | TFTP_SERVER=ip_address |
software will be downloaded |
|
|
|
Name of the file that will be downloaded to | TFTP_FILE=filename |
the router |
|
|
|
Cisco 819 Integrated Services Routers Software Configuration Guide
|
|
| |
|
|
