Cisco Systems C819HG4GVK9 Specifying a Synchronous Serial Interface, ISRs, Configuration Examples

Contents

C H A P T E R	7	Environmental and Power Management					7-1
		Cisco EnergyWise Support		7-2
		Configuring the Serial Interface
C H A P T E R	8				8-1
		Legacy Protocol Transport		8-2
		Configuring Serial Interfaces		8-2
		Information About Configuring Serial Interfaces							8-3
		Cisco HDLC Encapsulation			8-3
		PPP Encapsulation	8-3
		Multilink PPP	8-4
		Keepalive Timer	8-4
		Frame Relay Encapsulation			8-5
		LMI on Frame Relay Interfaces					8-6
		How to Configure Serial Interfaces				8-6
		Configuring a Synchronous Serial Interface							8-6
		Specifying a Synchronous Serial Interface 8-7
		Specifying Synchronous Serial Encapsulation 8-7
		Configuring PPP 8-8
		Configuring Half-Duplex and Bisync for Synchronous Serial Port Adapters on Cisco 819
		ISRs 8-8
		Configuring Compression of HDLC Data							8-9
		Using the NRZI Line-Coding Format						8-9
		Enabling the Internal Clock				8-10
		Inverting the Transmit Clock Signal						8-10
		Setting Transmit Delay			8-11
		Configuring DTR Signal Pulsing					8-11

		Ignoring DCD and Monitoring DSR as Line Up/Down Indicator 8-11
		Specifying the Serial Network Interface Module Timing 8-12
		Configuring Low-Speed Serial Interfaces	8-14
		Understanding Half-Duplex DTE and DCE State Machines		8-14
		Changing Between Synchronous and Asynchronous Modes		8-18
		Configuration Examples 8-19
		Interface Enablement Configuration: Examples 8-19
		Low-Speed Serial Interface: Examples 8-20
		Synchronous or Asynchronous Mode: Examples 8-20
		Half-Duplex Timers: Example 8-20
		Configuring Security Features 9-1
C H A P T E R 9
		Authentication, Authorization, and Accounting	9-1
		Cisco 819 Series Integrated Services Routers Software Configuration Guide
	OL-23590-02				3