Cisco Systems C819HG4GVK9 6-15, Configuring Backup Data Lines and Remote Management, OL-23590-02

Chapter 6 Configuring Backup Data Lines and Remote Management

Configuring Dial Backup and Remote Management Through the Console Port

ip route 0.0.0.0 0.0.0.0 63.203.35.137 80 ip route 0.0.0.0 0.0.0.0 63.203.35.138 80 ip route 0.0.0.0 0.0.0.0 63.203.35.139 80 ip route 0.0.0.0 0.0.0.0 63.203.35.140 80 ip route 0.0.0.0 0.0.0.0 63.203.35.141 80 ip route 0.0.0.0 0.0.0.0 Dialer1 150

no ip http server ip pim bidir-enable

!

! PC IP address behind CPE.

access-list 101 permit ip 192.168.0.0 0.0.255.255 any access-list 103 permit ip 192.168.0.0 0.0.255.255 any

!

!Watch multiple IP addresses because peers are alternated

!among them when the CPE is connected.

dialer watch-list 1 ip 64.161.31.254 255.255.255.255 dialer watch-list 1 ip 64.174.91.254 255.255.255.255 dialer watch-list 1 ip 64.125.91.254 255.255.255.255

!

!Dial backup will kick in if primary link is not available

!5 minutes after CPE starts up.

dialer watch-list 1 delay route-check initial 300 dialer-list 1 protocol ip permit

!

!Direct traffic to an interface only if the dialer is assigned an IP address. route-map main permit 10

match ip address 101 match interface Dialer1

route-map secondary permit 10 match ip address 103

match interface Dialer3

!Change console to aux function.

line con 0 exec-timedout 0 0 modem enable stopbits 1

line aux 0 exec-timeout 0 0

!To enable and communicate with the external modem properly. script dialer Dialout

modem InOut

modem autoconfigure discovery transport input all stopbits 1

speed 115200 flowcontrol hardware

line vty 0 4 exec-timeout 0 0 password cisco login

!

scheduler max-task-time 5000 end

	Cisco 819 Series Integrated Services Routers Software Configuration Guide
OL-23590-02		6-15