Cisco Systems C819GUK9, C819HG4GVK9 manual Command Purpose, Example

Chapter 5 Basic Router Configuration

Configuring Command-Line Access

DETAILED STEPS

	Command	Purpose
Step 1
	line [aux console tty vty]	Enters line configuration mode and specifies the
	line-number	type of line.
	Example:	This example specifies a console terminal for
		access.
	Router(config)# line console 0
	Router(config-line)#
Step 2
	password password	Specifies a unique password for the console
	Example:	terminal line.
	Router(config)# password 5dr4Hepw3
	Router(config-line)#
Step 3
	login	Enables password checking at terminal session
	Example:	login.
	Router(config-line)# login
	Router(config-line)#
Step 4
	exec-timeoutminutes [seconds]	Sets the interval that the EXEC command
	Example:	interpreter waits until user input is detected. The
		default is 10 minutes. Optionally, add seconds to
	Router(config-line)# exec-timeout 5 30	the interval value.
	Router(config-line)#	This example shows a timeout of 5 minutes and
		30 seconds. Entering a timeout of 0 0 specifies
		never to time out.
Step 5
	line [aux console tty vty]	Specifies a virtual terminal for remote console
	line-number	access.
	Example:
	Router(config-line)# line vty 0 4
	Router(config-line)#
Step 6
	password password	Specifies a unique password for the virtual
	Example:	terminal line.
	Router(config-line)# password aldf2ad1
	Router(config-line)#

Cisco 819 Series Integrated Services Router Software Configuration Guide

5-6 OL-23590-02