Brocade Communications Systems 6650 Displaying 802.1X multiple-host authentication information

Brocade ICX 6650 Security Configuration Guide 191
53-1002601-01
Displaying 802.1X information
Syntax: show dot1x
Displaying the status of strict security mode on an interface
To display the status of strict security mode on an interface, enter a command such as the following
Syntax: show dot1x config ethernet port
Specify the port variable in stack-unit /slotnum/portnum format.
Displaying 802.1X multiple-host
authentication information
You can display the following information about 802.1X multiple-host authentication:
•Information about the 802.1X multiple-host configuration
•The dot1x-mac-sessions on each port
•The number of users connected on each port in a 802.1X multiple-host configuration
Brocade# show dot1x
PAE Capability: Authenticator Only
system-auth-control: Enable
re-authentication: Disable
global-filter-strict-security: Enable
quiet-period: 60 Seconds
tx-period: 30 Seconds
supptimeout: 30 Seconds
servertimeout: 30 Seconds
maxreq: 2
re-authperiod: 3600 Seconds
security-hold-time: 60 Seconds
Protocol Version: 1
Brocade# show dot1x config e 1/1/3
Port 1/1/3 Configuration:
Authenticator PAE state: AUTHENTICATED
Backend Authentication state: IDLE
AdminControlledDirections: BOTH
OperControlledDirections: BOTH
AuthControlledPortControl: Auto
AuthControlledPortStatus: authorized
quiet-period: 60 Seconds
tx-period: 30 Seconds
supptimeout: 30 Seconds
servertimeout: 30 Seconds
maxreq: 2
re-authperiod: 3600 Seconds
security-hold-time: 60 Seconds
re-authentication: Disable
multiple-hosts: Disable
filter-strict-security: Enable
Protocol Version: 1