Brocade Communications Systems 6650 Clearing ACL and rate limit counters, Parameter Description

Enabling and using ACL statistics

Port Region#		Green Conformance	Yellow Conformance	Red Conformance
------------		-----------------	------------------	------------
7 (4/1 -	4/12)	551475	224589	0
All port	regions	551475	224589	0

Syntax: show access-list accounting traffic-policy [TPD-name]

or

Syntax: show statistics traffic-policy [TPD-name]

The TPD-namevariable is the name of the traffic policy definition for which you want to display ACL and traffic policy counters.

Table 22 explains the output of the show access-list accounting traffic-policy and show statistics traffic-policy commands.

TABLE 22	ACL and rate limit counting statistics
Parameter		Description
Traffic Policy		The name of the traffic policy.
General Counters
Port Region #		The port region to which the active traffic policy applies.
Byte Count		The number of packets that were filtered (matched ACL clauses).
Packet Count		The number of packets that were filtered (matched ACL clauses).
Rate Limiting Counters
Port Region#		The port region to which the active traffic policy applies.
Green Conformance		The number of packets that did not exceed the CIR packet rate.
Yellow Conformance		The number of packets that exceeded the CIR packet rate.
Red Conformance		The number of packets that exceeded the PIR packet rate.

Clearing ACL and rate limit counters

Brocade ICX 6650 keeps a running tally of the number of packets and the number of bytes per packet that are filtered by ACL statements and rate limiting traffic policies. You can clear these accumulated counters, essentially resetting them to zero. To do so, use either the clear access-list accounting traffic-policycommand or the clear statistics traffic-policycommand.

To clear the counters for ACL counting and rate limit counting, enter either of the following commands.

Brocade(config)# clear access-list accounting traffic-policy CountOne Brocade(config)# clear statistics traffic-policy CountTwo

Syntax: clear access-list accounting traffic-policy TPD-name

or

Syntax: clear statistics traffic-policy TPD-name

Brocade ICX 6650 Security Configuration Guide	151
53-1002601-01