Brocade Communications Systems 6650 manual Pvid

Field

Port-Control

filter strict security

PVID State

Original PVID

PVID mac total

PVID mac authorized

num mac sessions

num mac authorized

TABLE 36

Displaying 802.1X information

Brocade#	show dot1x config e 1/3/1
Port-Control		: control-auto
filter strict security		: Enable
PVID State		: Restricted (10)
Original	PVID	: 10
PVID mac	total	: 1
PVID mac	authorized	: 0
num mac sessions		: 1
num mac authorized		: 0

Syntax: show dot1x config ethernet port

Specify the port variable in stack-unit/slotnum/portnumformat.

The following table lists the fields in the display.

Output from the show dot1x config command

Description

The configured port control type for the interface. This can be one of the following: force-authorized– The controlled port is placed unconditionally in the authorized state, allowing all traffic. This is the default state for ports on the Brocade device. force-unauthorized– The controlled port is placed unconditionally in the unauthorized state. No authentication takes place for any connected 802.1X Clients. auto – The authentication status for each 802.1X Client depends on the authentication status returned from the RADIUS server.

Whether strict security mode is enabled or disabled on the interface.

The port default VLAN ID (PVID) and the state of the port PVID. The PVID state can be one of the following

Normal – The port PVID is not set by a RADIUS server, nor is it the restricted VLAN. RADIUS – The port PVID was dynamically assigned by a RADIUS server. RESTRICTED – The port PVID is the restricted VLAN.

The originally configured (not dynamically assigned) PVID for the port.

The number of devices transmitting untagged traffic on the port PVID.

The number of devices transmitting untagged traffic on the port PVID as a result of dynamic VLAN assignment.

The number of dot1x-mac-sessions on the port.

The number of authorized dot1x-mac-sessions on the port.

Displaying information about the dot1x MAC sessions on each port

The show dot1x mac-sessioncommand displays information about the dot1x-mac-sessions on each port on the device. The output also shows the authenticator PAE state.

Brocade ICX 6650 Security Configuration Guide	193
53-1002601-01