Brocade Communications Systems 6650 Output from the show auth-mac-addresses detailed command, Yes

Displaying multi-device port authentication information

Brocade# show auth-mac-addresses		detailed ethernet 1/2/3
Port	Assignment	: 1/2/3
Dynamic-Vlan		: Enabled
RADIUS failure action		: Block Traffic
Failure restrict use dot1x		: No
Override-restrict-vlan		: Yes
Port Default VLAN		: 101 ( RADIUS assigned: No) (101)
Port Vlan State		: DEFAULT
802.1x override Dynamic PVID		: YES
override return to PVID		: 101
Original PVID		: 101
DOS attack protection		: Disabled
Accepted Mac Addresses		: 1
Rejected Mac Addresses		: 0
Authentication in progress		: 0
Authentication attempts		: 0
RADIUS timeouts		: 0
RADIUS timeouts action		: Success
MAC Address on PVID		: 1
MAC Address authorized on PVID		: 1
Aging of MAC-sessions		: Enabled
Port move-back vlan		: Port-configured-vlan
Max-Age of sw mac session		: 120 seconds
hw age for denied mac		: 70 seconds
MAC Filter	applied	: No
Dynamic ACL applied		: No
num Dynamic Tagged Vlan		: 2
Dynamic Tagged Vlan list		: 1025 (1/1) 4060 (1/0)

------------------------------------------------------------------------------

MAC Address RADIUS Server Authenticated TimeAge Dot1x

------------------------------------------------------------------------------

0000.000074.3181 64.12.12.5 Yes 00d01h03m17s Ena Ena

The following table describes the information displayed by the show auth-mac-addresses detailed command.

TABLE 63 Output from the show auth-mac-addresses detailed command

Field	Description
Port	The port to which this information applies.
Dynamic-Vlan Assignment	Whether RADIUS dynamic VLAN assignment has been enabled for the port.
RADIUS failure action	What happens to traffic from a MAC address for which RADIUS authentication
	has failed either block the traffic or assign the MAC address to a restricted
	VLAN.
Failure restrict use dot1x	Indicates if 802.1x traffic that failed multi-device port authentication, but
	succeeded 802.1x authentication to gain access to the network.
Override-restrict-vlan	Whether a port can be dynamically assigned to a VLAN specified by a RADIUS
	server, if the port had been previously placed in the restricted VLAN because a
	previous attempt at authenticating a MAC address on that port failed.
Port Default Vlan	The VLAN to which the port is assigned, and whether the port had been
	dynamically assigned to the VLAN by a RADIUS server.
Port VLAN state	Indicates the state of the port VLAN. The State can be one of the following
	“Default”, “RADIUS Assigned” or “Restricted”.

258	Brocade ICX 6650 Security Configuration Guide
	53-1002601-01