Brocade Communications Systems 6650 Displaying the MAC-VLAN table for a specific MAC address

Displaying information about MAC-based VLANs

Displaying the MAC-VLAN table for a specific MAC address

Enter the show table-mac-vlancommand to display the MAC-VLAN table information for a specific MAC address.

Brocade(config)# show table-mac-vlan 0000.0010.1001

-------------------------------------------------------------------------------

MAC Address Port Vlan Authenticated Time Age dot1x

-------------------------------------------------------------------------------

0000.0010.1001 1/1/1 2 Yes 00d00h05m45s Ena Dis

Syntax: show table-mac-vlan mac-address

The following table describes the information in this output.

TABLE 49 Output field description of show table-mac-vlancommand

FieldDescription

MAC Address	The MAC address for which this information is displayed.
Port	The port where MAC-based VLAN is enabled.
Vlan	The VLAN to which the MAC address has been assigned.
Authenticated	Yes indicates authentication is successful.
	No indicates authentication has failed.
	Inp indicates authentication in progress
	Rst indicates a restricted VLAN
Time	The time at which the MAC address was authenticated. If the clock is set on the Brocade
	device, then the actual date and time are displayed. If the clock has not been set, then the
	time is displayed relative to when the device was last restarted.
Age	The age of the MAC address entry in the authenticated MAC address list.
Dot1x	Indicates if 802.1X authentication is enabled or disabled for the MAC address.

Displaying allowed MAC addresses

Enter the show table-mac-vlanallowed-maccommand to display information about successfully authenticated MAC addresses.

Brocade# show table-mac-vlan allowed-mac

-------------------------------------------------------------------------------

MAC Address Port Vlan Authenticated Time Age dot1x

-------------------------------------------------------------------------------

0000.0074.3181 1/1/17 76 Yes 00d01h17m22s Ena Dis

Syntax: show table-mac-vlan allowed-mac

The following table describes the information in this output.

TABLE 50 Output field description of the show table-mac-vlanallowed-maccommand

FieldDescription

MAC Address	The allowed MAC addresses for which the information is displayed.
Port	The port where MAC-based VLAN is enabled.

222	Brocade ICX 6650 Security Configuration Guide
	53-1002601-01