Hoffman Media EDD-4C manual Installation requirements

Important: The relative spacing between the oil tank, the Dripmaster, and the line-shaft inlet should be according to Figure 2. In order to maintain minimal oil pressure on the needle valve (especially when the oil tank is almost empty), the oil inlet should be in the range of 10 to 14 inches below the oil tank.

10 to 14 inches

(25.4 to 35.6 cm)

Oil tank

1/4-inch (0.635 cm) copper pipe

Oil filter

1/4-inch flexible

copper tubing

Lineshaft

Figure 2: Installation requirements

8