Enterasys Networks CSX6000, CSX5500, CSX7000 manual Configuring CSM Authentication Server

USER’S GUIDE

CSM AUTHENTICATION SERVER

CONFIGURING CSM AUTHENTICATION SERVER

Notes: In order for the CyberSWITCH to reference CSM for device authentication, the following configuration steps must first be completed:

•IP Routing must be enabled. If you try to enable CSM before IP routing has been enabled, an error message will be displayed.

•The appropriate LAN network interface(s) must be configured to represent the local IP network.

•The appropriate WAN network information must be configured for each type of remote device configured that will connect to the system.

If you have configured Call Restrictions, you have configured system wide Call Restrictions. System wide Call Restrictions will override Call Restrictions configured on CSM on a per device basis.

USING CFGEDIT

1.Select Security from the main menu.

2.Select option (5), Off-node Server Information from the Security Menu. The following screen is displayed:

Off-node Server Information Menu:

1)CSM

2)RADIUS

3)TACACS

4)ACE

Select function from above or <RET> for previous menu: 1

3.Select CSM from the Off-node Server Information Menu. The following screen is displayed:

CSM Menu:

TCP Port Number is 2000

CSM Server Options:

1)CSM TCP Port

Select function from above or <RET> for previous menu: 1

4.Enter the TCP port number used by CSM.

USING MANAGE MODE COMMANDS

csm

Displays the current CSM configuration data.

csm change

Allows you to change the CSM TCP port number.

208 CyberSWITCH