USER’S GUIDE

number/range configured for the Remote LAN port differs from the network number/range that is being broadcasted in RTMP packets by other remote routers, the port becomes unusable.

Configuration

In order to properly set up an AppleTalk Remote LAN, you must:

enable AppleTalk Routing from Options

configure the WAN (Remote LAN) port from Options, AppleTalk Routing, AppleTalk Ports

enable bridging and optionally specify an AppleTalk network number for the pertinent device level entries from Security, Device-Level Databases, On-node Device Entries

Considerations

Note the following in regard to the AppleTalk Remote LAN feature:

The CyberSWITCH does not initiate connections to AppleTalk Remote LAN devices. The re- mote bridge is responsible for connecting to the CyberSWITCH. The CyberSWITCH can for- ward packets to the remote device once a connection is established.

AppleTalk spoofing is not currently supported for this feature.

Off-node route lookup is not currently supported for this feature.

APPLETALK STATIC ROUTES

CONFIGURING APPLETALK STATIC ROUTES

USING CFGEDIT

1.Select AppleTalk Static Routes from the AppleTalk Routing Menu.

2.Press 1 to add a static route.

3.Select the AppleTalk network type of the destination network.

4.Enter the destination network range/number reachable through this static route.

5.Enter the AppleTalk address of the Next Hop device, or, enter “0.0” if the Next Hop device is over an unnumbered link.

6.If you entered “0” for the AppleTalk address of the Next Hop device, enter the device name of the Next Hop device. (Note that the device information for the Next Hop device must be already configured. Refer to Configuring a On-node Device Database for instructions for configuring device information.)

7.Enter the number of hops for this route.

8.Enter the zone name(s) of the remote network.

For an extended network, there will be a default zone name, and there will possibly be additional zone names.

For nonextended networks, there will be a single zone name.

362 CyberSWITCH

Page 362
Image 362
Enterasys Networks CSX7000, CSX5500, CSX6000 manual Appletalk Static Routes, Configuration, Considerations