Enterasys Networks CSX7000 manual Select Add a Syslog Server, LOG Options Configuration Elements

CONFIGURING OTHER ADVANCED OPTIONS

Log Options

Log Options Menu:

1)Log Servers

2)Call Detail Recording

3)System Message (DR) log

4)Authentication Message (DA) log

Select function from above or <RET> for previous menu:

2.Configure a Syslog Server:

a.Select Log Servers. (Note that upon selection, no configuration is needed for a local log file. The local log file name is preconfigured.)

b.Select Add a Syslog Server.

c.Enter the Syslog Server IP address using dotted decimal notation.

d.Enter the UDP port number for the Syslog Server.

e.Return to Log Options Menu.

3.Identify which reports should be sent to which server:

a.From Log Options, select Call Detail Recording.

•Press <1> to select an active server to which the CDR log reports should be sent.

•From the displayed list, enter the ID of the log file you wish to use.

•Enter the decimal UNIX priority value.

b.From Log Options, select System Message (DR) log.

•Press <1> to select an active server to which the System Message log reports should be sent.

•From the displayed list, enter the ID of the log file you wish to use.

•Enter the decimal UNIX priority value.

c.From Log Options, select Authentication Message (DA) log.

•Press <1> to select an active server to which the Authentication Message log reports should be sent.

•From the displayed list, enter the ID of the log file you wish to use.

•Enter the decimal UNIX priority value.

USING MANAGE MODE COMMANDS

log options

Displays the Log Options menu. The configuration screens are identical to those displayed by CFGEDIT. Refer to the above section for instructions.

LOG OPTIONS CONFIGURATION ELEMENTS

Note: The local log file path and file name is preconfigured for your system; no configuration elements are entered for a local log file. Configuration elements are only needed for Syslog Servers.

IP ADDRESS

The IP address of the Syslog Server using dotted decimal notation; 0.0.0.0 and 255.255.255.255 are not allowed. The Syslog Server must be accessible via a LAN connection (and not a WAN connection).

Central Site Remote Access Switch 401