Enterasys Networks CSX6000, CSX5500 Select Change from the Data Lines menu of Physical Resources

CONFIGURING RESOURCES AND LINES

Lines

care that the idle character is set to a value that the receiving device will understand. For example, CISCO devices require the flag data line idle character.

CONFIGURING CHANGES FOR A COMMPORT RESOURCE

1.Select Change from the Data Lines menu of Physical Resources.

2.Select ASYNCDMPORT.

3.You will be prompted to accept the default or provide new information for the following:

a.baud rate

b.data bits

c.stop bits

d.parity value

e.flow control type

f.mode:

•Autosense (default): can be either terminal or PPP-async. Requires user interaction (four carriage returns) to get to terminal mode.

•Term: terminal mode only. Login prompt automatically sent to remote console.

USING MANAGE MODE COMMANDS

line

Displays the current line configuration.

datalink

Display the current data link configuration.

datalink add

Allows you to add a data link. The following sample screen shows how a data link is added.

Current LINE Configuration:
id	LINE NAME	TYPE	SLOT	PORT

--------------------------------------------------------------------------------

1	LINE.BASICRATE1	BR_ISDN	1	1
2	LINE.BASICRATE2	BR_ISDN	1	2
3	DMS100.LINE1	BR_ISDN	2	1
Select	line id for new data link or press <RET> to cancel: 3<RET>

Automatic TEI negotiation (Y or N) [default = Y]? N<RET>

TEI value [default = 1]? <RET>

Service Profile ID (enter 0 for no SPID) [default = NO SPID]? 13135551212<RET>

Directory number [default = 13135551212]? 5551212<RET>

Number of digits to verify [default = 7]? <RET>

The DATALINK configuration has been updated successfully.

datalink change

Changes an existing data link.

Central Site Remote Access Switch 121