QSC Audio CMX 2000V user manual Specifications, Cmx, Pin 2 positive, Per channel

Specifications

	CMX 2000V
Stereo Mode (both channels driven)
8Ω / FTC 20 Hz - 20 kHz / 0.1% THD	1050 W
8Ω / EIA 1 KHZ / 0.1% THD	1100 W
4Ω / FTC 20 HZ - 20 KHZ / 0.1% THD	1600 W
4Ω / EIA 1 KHZ / 1% THD	2000 W
2Ω / EIA 1 KHZ / 1% THD	2500 W
70 V - Direct drive / EIA 1 kHz / 1% THD	2500 W
100 V - Direct drive / EIA 1 kHz / 1% THD	1000 W
Bridge Mono Mode
8Ω / FTC 20 Hz - 20 kHz / 0.1%THD	3200 W
8Ω / EIA 1 kHz / 0.1%THD	3600 W
4Ω / EIA 1 kHz / 1%THD	5000 W
140 V - Direct drive / EIA 1 kHz / 1% THD	5000 W
100 V - Direct drive / EIA 1 kHz / 1% THD	3600 W
Distortion (SMPTE-IM)	< 0.01%
Signal to Noise (20 Hz – 20 kHz) 8Ω	> -100 dB
Input Sensitivity 8Ω	1.42 V (+5.3 dBu)
Voltage Gain (8Ω)	36 dB
Output Circuitry	3-tier Class H
Power Requirements
Typical, 1/8 power, pink noise at 4Ω
120 VAC	13.9 A
230 VAC	7 A
Severe, 1/3 power pink noise at 4Ω
120 VAC	26.9 A
230 VAC	13.5 A
Frequency Response	20 Hz – 20 kHz, +/- 1 dB dB -3 dB points: 5 Hz and 50 kHz (LF filter bypassed / 8Ω)
Damping Factor	> 300 at 8Ω
Input Impedance (Ω)	10 kΩ unbalanced / 20 kΩ balanced
Input Clipping	6.4 Vrms (+18 dBu)
Cooling	Continuously variable speed fan, back-to-front air flow
Connectors (each channel)	Input: Active balanced; barrier strip, XLR and 1/4" (6.3 mm) - TRS tip and XLR
	(pin 2 positive)
	Output: Detachable terminal block and Speakon™
Controls	Front: AC Switch, Channel 1 and Channel 2 gain knobs
	Rear: 10-position DIP switch
Indicators	Power-on: Green LED / Signal: Green LED (1 per channel) / Clip: Red LED
	(1 per channel)
Amplifier Protection	Stable into reactive or mismatched loads
Load Protection	On/off muting, triac crowbar on each channel
Dimensions (HWD)	5.25" (3RU) x 19" x 15.9" (133 mm x 483 mm x 400 mm)
Weight - Net / Shipping	75 lb (34 kg) / 87 lb (39.5 kg)

Specifications subject to change without notice.

18