Unpacking
Factory packed carton contains:
•CMX amplifier
•User's manual
•Adhesive rubber feet (for non‑rack mount applications)
•Attenuation security plate
•Rear rack ear mounting kit
•IEC‑type detachable power cord
Use the same type carton when shipping the amplifier.
Rack Mounting
Use four screws and washers to mount the amplifier to the equipment rack rails. To use the amplifier outside a rack, attach the self‑adhesive rubber feet to the bottom. Use the rear rack ear support kit to support the rear of the amplifier for portable use. Refer to (Figure 2) for planning.
vertical centerline of holes is 0.40" (10.2 cm) from back edge
hole size = 0.25" x 0.47" (06.4 x 11.9 mm)
| 15.8" (402 mm) |
| 14.8" (375 mm) |
| 5.2" (132 mm) |
17.40" (442 mm) | 2.25" (57 mm) |
3.00" (7.6 cm) 2.25" (5.7 cm)
2.60" (66 mm)
notch is 0.40" high x 0.50" deep (1.0 x 1.2 cm)
18.90" (482 mm)
— Figure 2 —
4
