Enterasys Networks CSX7000, CSX5500, CSX6000 manual Baud Rate, Usage Instructions

USER’S GUIDE

Baud Rate

If you wish to enter a new baud rate, enter a menu selection of “B “(for Baud Rate). Continue to press B until the baud rate you desire is displayed.

When you have finished making Carbon Copy configuration parameter changes, enter a menu selection of “X” to save your changes and exit the CCINSTAL program. You will be asked if you wish to update the presently running Carbon Copy. Enter “Y” for yes. Carbon Copy will then be reinitialized and you will be returned to the MSDOS prompt.

USAGE INSTRUCTIONS

ESTABLISHING A REMOTE ADMINISTRATION SESSION

When using the remote administration console option, Carbon Copy establishes an administration session with the CyberSWITCH. This section contains a brief description of establishing an administration session using Carbon Copy.

1.If you did not install the Manager software onto the administration console PC (see Upgrading System Software) then insert the Manager software diskette into the diskette drive on the administration console PC.

2.Set the administration console PC to the disk drive containing the Manager software (replace “drive letter” with the appropriate administration console PC drive, for example, “A” or “C”). Type:

<drive letter>:<return>

3.Set the administration console PC to the directory containing the Manager software. Type: cd \admin<return>

4.Load the Carbon Copy CCHELP program on the administration console PC. Type: cchelp<return>

Within 3 to 10 seconds, Carbon Copy will be displayed on the screen. The screen is divided into three sections. In the lower right hand corner is the Carbon Copy command screen. It is function-key driven and provides the following commands:

[F1]	Call CC Device
[F3]	Capture Screen/Session
[F4]	Review/Replay Captured Image
[F6]	Printer/LOG/DOS Control
[F7]	Terminal Emulation
[F8]	Data Link Maintenance
[F10]	Return to Application

5.Choose Call CC Device from the Carbon Copy command screen. Press: <F1>

The system will prompt you for a phone number. If you are using remote access with modems, then enter a phone number. If you are directly connected with a null-modem cable, then no phone number is required; just press the enter key.

6.Type: <phone number><return>

(or just <return> if directly connected)

572 CyberSWITCH