Enterasys Networks CSX5500, CSX6000, CSX7000 manual USER’S Guide

USER’S GUIDE

Routers shown in the diagram above. Sample configurations for the objects in the above network diagram are as follows:

Configuration for IP Router "Alex"	Configuration for IP Router "Ruby"
System Information:	System Information:
System Name = Alex	System Name = Ruby
System Password = stone	System Password = rubble
Security Level = Device Level (On-node	Security Level = Device Level (On-node
Device Database, PAP security)	Device Database, PAP security)
Bridging disabled	Bridging disabled
IP enabled (router mode)	IP enabled (router mode)
I/F = LAN (192.168.1.168)	I/F = LAN (204.157.42.168)
I/F = WAN (192.168.10.168)	I/F = WAN (192.168.10.1)
Static Route = (dest) 204.157.42.0
(next hop) 192.168.10.1
DHCP enabled	DHCP enabled
Relay Destination #1 = 192.168.1.5	Relay Destination #1 = 192.168.10.168
(interface = “N/A”)	(interface = “N/A”)
Hop Count Threshold = 4	Hop Count Threshold = 4
Device = “Ruby”	Device = “Alex”
ISDN Line Protocol = PPP	ISDN Line Protocol = PPP
Dial Out Phone # = 5311	Dial Out Phone # = 5411
PAP Password = “rubble”	PAP Password = “stone”
IP Address = 192.168.10.1	IP Address = 192.168.10.168
IP Routing = enabled	IP Routing = enabled
Make calls for IP data = enabled	Make calls for IP data = enabled
Bridging = disabled	Bridging = disabled

Note: The DHCP Server must have a route specified to get back to the DHCP-enabled router Ruby, or use Alex as its default gateway.

312 CyberSWITCH