Enterasys Networks CSX6000, CSX5500, CSX7000 Call Restrictions have been enabled by user command

USER’S GUIDE

Call Restrictions have been enabled by user command

The user has enabled Call Restrictions via the callrest on Dynamic Management command.

Call Restriction statistics reset for new day

Call Restriction device information.

Call Restriction statistics reset for new month

Call Restriction device information.

Call Restrictions will allow calls to be made this hour

Call Restriction device information.

Call Restrictions will allow calls, but this hour is restricted

Calls are restricted during this hour but the action configured is to “Warn”. Calls are still being allowed.

Call Restrictions will allow calls to be made

A Call Restriction limit has been exceeded but calls will still be allowed.

Call Restrictions will no longer allow calls to be made

A Call Restriction limit has been exceeded and calls will no longer be allowed. Existing calls will NOT be forced down.

Call Restrictions will not allow calls to be made this hour

Call Restriction device information.

Call Summary for <day/month/year> - Calls/Day=x Calls/Mth=x Mins/Day=x Mins/Mth=x

Call Restriction device information. Displays daily/monthly call totals at the end of a day or a month.

Cannot make Bridge Dial Out call. No device found.

Check configuration to insure that device is properly configured.

Can only do SPEECH and 3.1K AUDIO calls in HOST_CALL_REQUEST

An improper outgoing call was attempted on an RBS line. Ensure that the device that is being called is a digital modem device and ensure that the “dm” flag has been added to peer calls.

Can’t call Dial Out User. Security is not Device Level.

Check configuration. Bridge Dial Out requires device-level security and a properly configured Device List.

Can’t start offnode server lookup of Dial Out User.

CyberSWITCH unable to send out a request to the off-node server. One of two possibilities: there may be problems communication on the LAN, or the server may not be configured properly. Verify LAN connectivity with server, and then check to see if server configured properly.

Calls Active xx Active Sites

Current number of sites connected.

490 CyberSWITCH