SYSTEM MESSAGES

System Message Summary

Error during channel initialization Access <access index>

An error has occurred during the initialization of the indicated Frame Relay Access, or port. Likely cause of this entry is that the system has run out of memory. Contact your Distributor or Customer Support.

Error during port initialization Access <access index>

An error has occurred during the initialization of the indicated Frame Relay Access, or port. Likely cause of this entry is that the system has run out of memory. Contact your Distributor or Customer Support.

Error during PVC initialization Access <access index>

An error has occurred during the initialization of the indicated. Likely cause of this entry is that the system has run out of memory. Contact your Distributor or Customer Support.

Error initializing WAN card: <WAN card Id>

The system could not initialize the specified WAN card during system initialization. Check the WAN card installation and configuration. If the error continues, report the problem.

Error in last LMI message detected Error <error code>

An error was detected in the last LMI message forwarded by the network. The error is identified by the indicated error code.

Error loading WAN board, data verify error: adapter ’x’

The WAN card initialization subsystem encountered an error during download verification. The specified adapter card may be faulty. Contact your Distributor or Customer Support.

Error mapping WAN adapter #’x’ into Host memory map

The configured memory location of the indicated WAN card conflicts with another WAN card or device. Review the configuration for the indicated adapter.

Error opening file <file name>

Error opening file <file name>, section = <section name>

Error opening file <file name>, slot <slot #>

If seen repeatedly, contact your Distributor or Customer Support.

Error parsing old WAN (Direct Host) interface: bad format

The information contained in the WAN (Direct Host) interface is invalid. To correct, use CFGEDIT to reconfigure the interface.

Error initializing WAN card: <WAN card Id>

The system could not initialize the specified WAN card during system initialization. Check the WAN card installation and configuration. If the error continues, report the problem.

Error parsing old WAN (Direct Host) interface: LAN interface <LAN netif name> for specified port <port#> already in use

This error may display after upgrading software which contains secondary IP addressing and an “old” style WAN (Direct Host) interface. To correct, use CFGEDIT to delete any WAN (Direct Host) interfaces on the problematic LAN port, and reconfigure them.

Error parsing old WAN (Direct Host) interface: no LAN interface for specified port <port#>

This error may display after upgrading software which contains secondary IP addressing and an “old” style WAN (Direct Host) interface. To correct, use CFGEDIT to delete the problematic WAN

Central Site Remote Access Switch 501

Page 501
Image 501
Enterasys Networks CSX5500, CSX6000, CSX7000 manual Error during channel initialization Access access index