Sony HKDV-502, HKDV-503, HKDV-506A, HKDV-507 Error Messages and Warning Messages, Protection Mode

Error Messages and Warning Messages

Error Messages

When the unit ceases to opcº¡te correctly due to malfunction or an internal system error, the alarm will sound and an error message will be displayed on the display.

Only one message will be displayed even when multiple errors occur, but the error log menu keeps a history of the errors.

For more information about error messages, refer to the Maintenance Manual.

Protection Mode

To protect the tape and the mechanical parts of the VTR, the servo control system automatically stops tape transport and the drum motor and enters protection mode when an error occurs.

Cassettes may not be inserted or ejected during protection mode.

Note

After the error occurs, eliminate the cause of the error and turn the unit back on. If the error message appears again when the unit is turned on, contact your Sony representative.

For more information about eliminating errors, refer to the supplied Maintenance Manual.

When a cassette is stuck in the unit because of protection mode, make sure to disconnect the power before removing the cassette manually.

For information about removing cassettes manually, refer to the supplied Maintenance Manual.

Appendix

	D O L B Y N R CH.COND DIGITÅL			HOME
P B / E E K E Y - I N H G R E E N B Å S E B Å L L E D I T S E T
			L O C K
	T C R	P LEÅRYR O R - 041F D F 1
o f f	01Ó 04µ 58ß 00ƒ
R E C I N H
		R E E L T R O U B L E - 1
Å S S E M -	Å I N 0 0 : 0 0 : 0 0 : 0 0 Å O U T 0 0 : 0 0 : 0 0 : 0 0
B L E	I N 0 0 : 0 0 : 0 0 : 0 0 O U T 0 0 : 0 0 : 0 0 : 0 0
o f f
I N S					Error message
T C
o f f
I N S	I N S	I N S	I N S	I N S	I N S
V I D E O Å - C H 1 Å - C H 2 Å - C H 3 Å - C H 4					C U E
o f f	o f f	o f f	o f f	o f f	o f f

01REEL TROUBLE-1:Slack in the tape was detected during threading or unthreading.

02REEL TROUBLE-2:Slack in the tape was detected during searching, rewinding, or fast-forward.

03REEL TROUBLE-3:Slack in the tape was detected during playback or recording.

04REEL TROUBLE-4:Abnormality in tape speed was detected during fast-forward or rewinding.

05REEL TROUBLE-5: Abnormality detected in the operation of S or T reels during cassette compartment operation. Or, current flow for S or T reels deviated from the fixed value.

06TAPE TENSION ERROR: Excessive tension detected during recording or playback.

07CAPSTAN TROUBLE: Abnormality detected in capstan motor operation.

08DRUM TROUBLE: Abnormality detected in drum motor operation.

09TH/UNTH MOTOR TIME OUT: Abnormality detected during threading or unthreading.

0A THREADING TROUBLE: Tape top process did not end normally during threading.

10DEW DETECTED: Condensation detected.

11TAPE TOP/END SENSOR TROUBLE: Top and end of tape were detected simultaneously.

12TAPE TOP SENSOR TROUBLE: Trouble with the tape top sensor.

13TAPE END SENSOR TROUBLE: Trouble with the tap end sensor.

14FAN MOTOR TROUBLE: Abnormality detected in the operation of the fan motor.

20CASSETTE COMPARTMENT MOTOR LOCK: Abnormality detected during cassette compartment operation.

21REEL SHIFT MOTOR LOCK: Abnormality detected when moving the reel base corresponding to the cassette size.

22REEL POSITION SENSOR TROUBLE: Positions for L cassette and S cassette reel positions were detected simultaneously.

92INTERNAL INTERFACE: Abnormality detected in the communication with the CPU on the circuit board.

93CPU INITIALIZE ERROR: When the unit was powered up, an abnormality was detected in the initial communication with the CPU.

97SV NV-RAM TROUBLE: An abnormality was detected while reading servo adjustment data after the unit was turned on.

A0 READ WRITE ERROR: Error occurred during reading and writing to the SS-88 on-board RAM.

A1 SY ROM ERROR: Error detected while reading system computer ROM data when the unit was turned on.

A-8Appendix