Sony 507D, HKDV-503, HKDV-506A Formatting a memory label, Prohibiting Tele File menu operations

TELE FILE menu

Button	Indication	Function
[F1]	CUE SCAN	Specifies the direction of the
		cursormovementwhenthe
		PREROLL button is pressed.
[F2]	ENTRY POINT	Specifies whether IN and
		OUT point data are displayed
		or not in the TELE FILE
		menu.
[F3]	COMMNT EDIT	Edits the contents of the
		Commentsection.
[F4]	CHANGE DATA	Modifies the specified data.
[F5]	DEL POINT	Deletes the time data of the
		cuepoint.
[F6]	MARK	Changes the data in the Mrk
		section.
[F7]	PROTECT	Write-protectsthecuepoint
		data.
[F8]	TAPE INFO	Displays the TAPE
		INFORMATION window.
[F9]	CUENUM POINT	Moves the cursor to the line
		specifiedbythenumeric
		buttons.
[F10]	WRITE/EXIT	Closes the TELE FILE menu
		after saving changes to the
		memorylabel.
ALT/ [F1]	FORMAT T-Fil	Formats the memory label.
ALT/ [F2]	UNDO ALL	Undoes all changes.
ALT/ [F3]	ATTRIB EDIT	Changes the ID, ADMIN, or
		TITLE data in the TAPE
		INFORMATION window.
ALT/ [F4] COPY to CUE		Copies the time data of a cue
		point to another cue point
		indicated in the CUE menu.
ALT/ [F5]	T-Fil MODE	Selects the device to be used
		for TELE FILE menu
		operations.

		Note
		This setting can be done only
		when no cassette is inserted
		in the VTR.
ALT/ [F7]	WRITE PRTEC	Prohibits TELE FILE menu
		operations.
ALT/[F10]	WRITE/EXIT	Closes the TELE FILE menu
		after saving changes to the
		memorylabel.

Formatting a memory label

1 Press the ALT/[F1] (FORMAT T-Fil) buttons.

2 Press the [F1] (FORMAT T-Fil) button while pressing down the SFT button.

A message appears (in the control panel display) requesting confirmation of the formatting operation.

To cancel the formatting operation

Press the CLR button.

3 Press the [F1] (FORMAT T-Fil) button while pressing down the SFT button.

“COMPLETED” appears in the control panel display.

Selecting the device to be used for TELE FILE menu operations

With no cassette inserted, press the ALT/[F5] (T-Fil MODE) buttons to select the device.

232C: The device connected to the RS-232C connector on the VTR is used.

panel: The VTR control panel is used.

Prohibiting TELE FILE menu operations

Press the ALT/[F7] (WRITE PRTEC) buttons.

on: All TELE FILE menu operations are prohibited.

off: All TELE FILE menu operations are permitted.

Chapter 4 Menu Settings

Chapter 4 Menu Settings 4-43