Sony HKDV-503, HKDV-506A TCG Regene, Tcg/Ubg, Regene Mode, Rec Run/Free, Vitc SD, Vitc POSITION-1

Menu List

Item number	Item	Settable range	Function
606	TCG MODE select	[preset]	Selects the time code to which the internal time code
		regene	generator synchronizes.
		auto	preset: By an operation on the front panel or by remote
			control from a device connected to the REMOTE 1-IN
			(9P) connector, the initial value of the time code
			generated by the internal time code generator can be
			preset.
			regene: The internal time code generator is synchronized
			(“regene”) to the time code values read by the internal
			time code generator.
			auto: Operates in regene mode when either assemble or
			insert mode is selected and operates in preset mode
			when any other mode is selected.
607	TCG REGENE	[int-LTC]	If item 606 is set to “regene,” this selects the source of the
	SOURCE select	int-VITC	synchronization of the time code generated internally.
		ext-LTC	int-LTC: When the time code played back from the time
		ext-VITC	code track on the tape is used.
			int-VITC: When the time code played back from the “AUX
			data” in the video signal on the tape is used.
			ext-LTC: When the external time code input to the TIME
			CODE IN connector is used.
			ext-VITC: When the external time code input to the HD SDI
			INPUT connector is used.
608	TCG/UBG	[TC & UB]	Selects the regenerate signal when the time code generator
	REGENE MODE	TC	is in regenerate mode (when item 606. is set to regene) or
		UB	during auto edit mode.
			TC & UB: The time code signal and user bits signal are both
			regenerated.
			TC: The time code signal is regenerated.
			UB: The user bits signal is regenerated.
609	REC RUN/FREE	[free run]	This selects the way in which the time code advances.
	RUN select	rec run	free run: Regardless of the operating mode of this unit, the
			time code advances all the time that the power is on.
			rec run: The time code advances only during recording.

			Note
			When using this setting, set item 606. to “preset”.
610	VITC (SD)	[off]	Selects whether or not to insert VITC data in the HD-SD
Appendix		on	converter output.
			on: VITC data is not inserted.
			off: VITC data is inserted.
611	VITC POSITION-1	12 line	When an HKDV-501A (optional HD-SD Converter Board) is
	select (NTSC)	.	installed and 29.97PsF/59.94i mode is selected on the
		[16 line]	VTR, this setting specifies the lines in which the VITC
		.	signal is inserted.
		20 line	It can be inserted in any lines from 12 to 20.
			Note
			Items 611 and 612 allow VITC to be inserted in two lines.
612	VITC POSITION-2	12 line	When an HKDV-501A (optional HD-SD Converter Board) is
	select (NTSC)	.	installed and 29.97PsF/59.94i mode is selected on the
		[18 line]	VTR, this setting specifies the lines in which the VITC
		.	signal is inserted.
		20 line	It can be inserted in any lines from 12 to 20.
			Note
			Items 611 and 612 allow VITC to be inserted in two lines.

A-30Appendix