Sony HDW-F500, HKDV-503, HKDV-506A, HKDV-502 Specifications, Output connectors, Remote connectors

Appendix

Specifications

Output connectors

HD SDI OUTPUT

BNC (4, MONITOR with superimposed text)

1, 2, 3 and MONITOR

SDI (1.485 Gbps) (conforms to SMPTE 292M/BTA-S004B)

D CONV. SDI OUT (OPTION)

(when the optional HKDV-501A is installed, D1/D2 switchable)

BNC (3, 3(SUPER) with superimposed text)

1, 2 and 3(SUPER)

	D1 SDI (270 Mbps) (conforms to
	SMPTE 259M/CCIR-656-III)
	D2 SDI (143 Mbps) (conforms to
	SMPTE 259M/CCIR-656-III)
D CONV. OUT (OPTION)
	(when the optional HKDV-501A is
	installed)
	BNC (2, COMPOSITE (SUPER)
	with superimposed text)
COMPOSITE (SUPER)
	1.0 Vp-p, 75 Ω , sync negative
SYNC	Black burst

0.286 Vp-p, 75 Ω , sync negative

SDTI (OPTION) OUT

(when the optional HKDV-506A is installed)

BNC (1)

SDTI (270 Mbps)

PULL DOWN OUT (OPTION)

(when the optional HKDV-507/ 507D is installed)

BNC (2, with superimposed text)

REF. OUT

BNC (2)

1125 SYNC Trilevel SYNC

0.6Vp-p, 75 Ω , sync negative

AUDIO OUTPUT (AES/EBU)

BNC (2)

CH1/2 and CH3/4

AES/EBU format, unbalanced

AUDIO OUTPUT

XLR 3-pin, male (5)

CH1, CH2, CH3, CH4 and CUE

	+4 dBm, (with 600 Ω	load), low
	impedance, balanced
MONITOR OUTPUT
	XLR, 3-pin, female (2)
L and R	+4 dBm (with a 600 Ω	load), low

impedance, balanced

TIME CODE OUT

XLR, 3-pin, male (1)

2.2 Vp-p, low impedance, balanced

PHONES

JM-60 stereo phone jack

–∞to –12 dBu (with an 8 Ω load), unbalanced

Remote connectors

CONTROL PANEL

	D-sub 15-pin, female
REMOTE 1-IN	D-sub 9-pin, female
REMOTE 1-OUT	D-sub 9-pin, female
RS-232C	D-sub 25-pin, female

VIDEO CONTROL

D-sub 9-pin, female (for optional HKDV-503)

PARALLEL I/O (50P)

D-sub 50-pin, female (with optional BKDW-509)

..........................................................................................................................................................................................................

Note

The ANALOG AUDIO INPUT CH1/2/3/4/CUE connectors, ANALOG AUDIO OUTPUT CH1/2/3/4/CUE connectors, and TIME CODE IN/OUT connectors (XLR 3-pin) have gender conventions for input and output connectors in Japan

which are opposite to those everywhere else in the world. If using this unit with non-Japanese specification equipment, use male/female adaptors.

A-4Appendix