Sony HKDV-507, 507D Registering and Storing Menu Settings, Menu Configuration, PF1&2 Assign menu

4-1 Registering and Storing Menu Settings

The operating conditions of the VTR are set using the menu operation section on the lower control panel. Menu items are divided among six different menus (HOME, TC, CUE, PF1, PF2, SET UP).

Of these menus, the PF1/PF2 (Personal Function) menus can be used to register frequently used menu items from the other menus, allowing faster setting of VTR operating conditions. Eight VTR memory banks are provided for storing up to eight sets of menu settings. The contents of the eight VTR memory banks can, in turn, be stored on a memory card for later recall.

4-1-1 Menu Configuration

This VTR has two kinds of menus.

PF1&2 ASSIGN menu

This menu contains items that can be registered to the PF1/2 menus.

Press the [F4] (PF1&2 ASSIGN) button in the SET UP menu to display this menu.

For details on registering items in the PF1&2 ASSIGN menu to the PF1/2 menus, see Section 4-1-3, “Registering Items to the PF1/2 Menus” on page 4-3.

VTR SETUP menu

This menu contains items that specify the initial operating conditions of the VTR. You can change these settings directly without registering the items to the PF1/2 menus.

Press the [F6] (VTR SETUP) button in the SET UP menu to display this menu.

For details on setting operating conditions of the VTR, see Section 4-7-1, “VTR SETUP Menu” on page 4-61.

The menu configuration of the VTR is shown in the figure below,

HOME menu	PF1&2
TC menu	ASSIGN menu
PF1 menu	Registration
PF2 menu
CUE menu	VTR SETUP
	menu
SETUP menu
[F4] (PF1&2 ASSIGN) button
[F6] (VTR SETUP) button

Menu configuration

•All items in the HOME, TC, and CUE menus can be duplicated and registered to the PF1/2 menus.

•Most items in the VTR SETUP menu can be registered to the PF1/2 menus.

Chapter 4 Menu Settings

Chapter 4 Menu Settings 4-1