Play of the disc can be resumed by using the MODE button bu to choose the CD player function.
cu TIME/FREQUENCY SELECTOR (T/F)
During radio operation, press this button to call the time display on the incorporated quartz clock. The current time will appear together with an A or P indication. The display will return to the radio frequency indication after 5 seconds.
During disc play press of this button to call the time display. The display will return to
the disc indication after 5 seconds.
dl
The EQ button applies preset sound effects to the unit’s audio output signal.The EQ button, when pressed, will activate one of the following operating modes ( CLASSICS, POP M, ROCK M, DSP OFF or FLAT). Even though the Equalizer function is active, as displayed on the panel, if the bass and/or treble level is set, the Equalizer function automatically returns to the FLAT mode. Conversely, when the Equalizer function is not active, the unit returns to the user set bass and treble levels.
dm RESET BUTTON
The Reset button is located to the right of the SCN button on the front panel. The reset circuitry should only be activated under the following circumstances as it will erase the time and
1.Upon initial installation after all wiring is completed.
2.If there is a malfunction of any of the switches on the unit, pressing the Reset button may clear the system and return to normal operation.
dn FRONT PANEL RELEASE BUTTON (OPEN)
This button is used to release the mechanism that holds the front panel to the chassis. To fold down the front panel, press the button so that the panel drops to the lowered position. To reverse the panel and show only a blank surface, grasp the panel at the outer edge and press it up into position. This will give the appearance that no front panel exists. To return the front panel to its normal position, press the release button in the upper right corner of the blank surface; the panel will then fold down. Press in on the bottom edge to reposition the panel in its normal playing position.
do REMOTE SENSOR
The sensor to detect the infrared signal from the wireless remote control is located behind the LCD display lens. For optimum operation of the remote control, always aim the control at the LCD display.
NOTES ON USE OF FRONT PANEL:
1.When the OPEN button is pressed in the lower right corner of the front panel, the panel folds down into the horizontal position; in this position, compact discs can be loaded into the CD player. Then the panel can be returned to the normal vertical position by pressing inward and upward on the lower edge of the panel.
2.To reverse the panel surface (the back of the front panel), repeat step 1 above, and raise the underside of the bottom edge, folding the back side of the panel upward so that the blank side of the panel is facing outward. Press in until the panel clicks into place.
OPERATING INSTRUCTIONS
11
