Audiovox ACD88 manual Cd Changer Error Codes, Nger, du DISC/TRACK REPEAT PLAY RPT, Controls

du DISC/TRACK REPEAT PLAY (RPT)			button will also select tracks in the shuffled	CD
When the RPT button is pressed, the RPT			order instead of the normal progression. The	CHA
indication will appear on the display panel			Shuffle Track mode can be canceled by
and play of the selected track will be			pressing the SHF button or by activating the
continually repeated until the Track Repeat			Scan or Repeat Play functions.	NGER
mode is canceled by pressing the RPT			When the SHF button is pressed and held,
button twice or by activating the Scan or			the DSF indication will appear on the display
				CONTROLS
Shuffle Play functions.			panel and the discs in the magazine will be
			played in a random, shuffled order, as well
When the Repeat button is pressed twice
the DRT indication will appear on the display			as the tracks on each disc. After playing all
panel and play of the selected disc will be			tracks selected at random from a disc in
continually repeated until the Disc Repeat			the magazine, the unit will select another
mode is canceled by pressing the RPT			disc at random and play all the tracks on it	/
			in a random shuffled order. This will continue
				CD
button again or by activating the Scan or			from disc-to-disc until the Random Disc
Shuffle Play functions.			mode is canceled by pressing the SHF	CHA
el DISC/TRACK SHUFFLE PLAY (SHF)
			button again or by activating the Scan or
When the SHF button is pressed, the SHF			Repeat Play functions.	NGER
indication will appear on the display panel
and the tracks on the disc will be played in a
random, shuffled order. The Track Select				ERROR
		CD CHANGER ERROR CODES
If a problem should develop while operating the CD changer, the following error codes may				CODES
appear on the display panel.
	ER-1:Indicates that there is no magazine loaded in the CD changer.
	ER-2:Indicates a problem with the magazine eject function.
	ER-3:Indicates an error in the disc loading function.
	ER-4:Indicates an error in the disc un-loading function.
	ER-5:Indicates an error in the magazine position.
	ER-6:Indicates an error in the laser pick-up position.
	ER-7:Indicates an error in the laser focus on the disc.
In any of the above situations, try ejecting the CD magazine from the changer and make
sure the discs are clean, undamaged, and loaded correctly (refer to the Owner’s Manual
of the CD changer). Re-load the magazine and check for proper operation. You may also
try activating the RESET button dm on the unit, but this will also erase the time and pre-set
memories.				15
If the suggested measures do not solve the problem, contact an approved warranty station
near you for further assistance.