Sony HDW-F500, HKDV-503, HKDV-506A Registering and Storing Menu Settings, VTR Memory Bank Function

Press the [F8] (DIRECTION) button or press the f or F buttons twice to select the /direction.

Storing the current VTR menu settings to a VTR memory bank

1 Press the SET UP button.

The SET UP menu appears in the display.

2 Press the [F1] (VTR BANK) button.

The VTR BANK menu appears in the display.

4-1 Registering and Storing Menu Settings

Chapter 4 Menu Settings

4-1-4 VTR Memory Bank

Function

Eight VTR memory banks are provided for storing up to eight sets of menu settings including items registered to the PF1/2 menus with titles.

The contents of all eight VTR memory banks can be stored on a memory card.

Current menu settings in the

VTR (CURRENT SETUP). These settings are stored outside the VTR memory

banks even when the power Storing/recalling is off.

VTR memory banks (SETUP BANK1 to 8 and F). SETUP

BANKF contains the factory-

Storing/recalling set menu settings. By calling up SETUP BANK F, you can restore all menu items to their factory settings.

Memory card (SETUP	Storing/recalling
BANK 0 to 8). The card
stores setting data in same
way as the VTR memory
banks. These contents can
be later called up in the
VTR.

VTR memory bank function

For details on memory card use, refer to “4-1-5 Memory Card Function” on page 4-6.

For details on adding titles to the contents of the VTR memory bank, refer to “4-1-6 Adding Titles to the Data” on page 4-11.

Note

The contents of SETUP BANKF cannot be changed.

Storing the current VTR menu settings to a VTR memory bank

2 6,7 CLR button

4 3 81 5

	CH.COND			V T R	B Å N K
			F O O T B A L L
			T C R 0 0 : 0 0 : 0 0 : 0 0
	V T R B Å N K		V T R B Å N K
U N D O	C U R R E N T S E T U P		S E T U P B Å N K 7
	B A S E B A L L	ç	1 ( P r e s e t )
			2	( P r e s e t )
			3	( P r e s e t )
			4	( P r e s e t )
			5	( P r e s e t )
			6	( P r e s e t )
			7	F O O T B A L L
			8	( P r e s e t )
			ƒ ( P r e s e t )
	E D I T	D I R E C -		C O P Y	E X I T
	T I T L E	T I O N
			?

3

4 Press the f button to move the cursor (z) to CURRENT SETUP[C], then press the [F6] (EDIT TITLE) button to add a title to the current menu settings of the VTR.

For details, refer to “4-1-6 Adding Titles to the Data” on page 4-11.

5 Press the F button to move the cursor (z) to SETUP BANK, then press the G or g button to move the cursor to the number of the VTR memory bank to be used for saving the current menu settings.

4-4Chapter 4 Menu Settings