CONTENTS
Before using your new
•Read the Operator’s Manual carefully.
•Check the assembly and adjustment of the cutting chain, see chapter ”Assembly”.
•Start the engine and check the carburetor settings. See chapter ”Maintenance”, section ”Carburetor”. When adjusted correctly the cutting chain should not rotate when idling. Setting the idling speed is described in the Operator’s Manual. Adjust the speed according to these instructions. Do not use the
•Let your Husqvarna dealer check the
!WARNING!
Under no circumstances should you modify the original design of the
Your warranty does not cover damage or liability caused by the use of
!WARNING!
Use of products which cut, grind, drill, sand or shape material can generate dust and vapors which may contain harmful chemicals. Know the nature of the material being worked on and wear appropriate dust mask or respirator protection.
!WARNING! The ignition system of this machine produces an electromagnetic field during operation. This field may under some circumstances interfere with pacema- kers. To reduce the risk of serious or fatal injury, we recommend persons with pace- makers to consult their physician and the pacemaker manufacturer before operating this machine.
Husqvarna Construction Products has a policy of continuous product development. Husqvarna reserves the right to modify the design and appearance of products without prior notice and without further obligation introduce design modifications.
All information and all data in the Operator’s Manual were applicable at the time the Operator’s Manual was sent to print.
List of Contents |
|
Symbol explanation | 2 |
Safety instructions |
|
Personal protective equipment | 4 |
The machine’s safety equipment | 4 |
Control, maintenance and service of the machine’s safety |
|
equipment | 4 |
General safety instructions | 6 |
Storage | 6 |
Fuel safety | 7 |
General working instructions | 7 |
Using | 8 |
Cutting | 8 |
Kickback | 10 |
Care and storage | 10 |
Cutting equipment | 11 |
Cutting chains | 11 |
What is what? |
|
What is what on the machine? | 12 |
Assembly |
|
How to tension the chain | 13 |
How to change the chain and rim | 13 |
How to change the clamping force of the bar | 14 |
Fuel handling |
|
Fuel mixture | 15 |
Fuelling | 15 |
Start and stop |
|
Start and stop | 16 |
Maintenance |
|
Carburetor | 17 |
Fuel filter | 18 |
Air filter | 18 |
Starter | 19 |
Ignition system | 20 |
Spark plug | 20 |
Cooling system | 20 |
Muffler | 20 |
Daily maintenance | 21 |
Weekly maintenance | 21 |
Monthly maintenance | 21 |
Technical Data |
|
K950 Chain | 22 |
English – 3
