START AND STOP

Start and stop

!WARNING! Before starting observe the following:

•Do not start the cut-off saw without the guide bar, chain and side cover fitted. Otherwise the clutch can come loose and cause personal injury.

•Always move the cut-off saw from the filling area before starting.

•Ensure that you and the machine stand firmly and that the cutting chain can rotate freely.

•Make sure no unauthorised persons are within the working area.

Starting a cold engine

IGNITION:

Slide the stop switch to the left.

CHOKE:

Pull out the choke.

STARTER THROTTLE CATCH

Press in the throttle control and thereafter the starter throttle catch (A). Release the throttle control and the throttle is blocked in half throttle position. The catch is released when the throttle control is pressed in all the way.

DECOMPRESSION VALVE Press in the valve to reduce the pressure in the cylinder, this makes starting the cut-off saw easier. The decom- pression valve should always be used when starting. When the machine has started the valve automatically returns to its original position.

Starting a warm engine

Use the same procedure as for starting cold engine but without choke.

Wet cutting

The diamond chain saw must always be run with water cooling. Dry cutting causes immediate overheating and bar and chain failure with a risk of personal injury. In addition to cooling the bar and chain, the flow of water pushes particles away from the bar and the drive links. As a result it is important with a high water pressure. The water pressure should be at least 2.5 bar and a maximum of 11 bar. The recommended pressure is approx. 5 bar.

Start

!WARNING! The cutting chain can rotate when the engine starts. Make sure it can rotate freely.

Take hold of the front handle using your left hand. Place your right foot on the lower section of the rear handle and press the cut-off saw against the ground. Never twist the starter cord around your hand.

Grip the starter with your right hand, and slowly pull the starter cord out until you feel some resistance (the pawls grip) now pull quickly and powerfully.

NOTE! Do not pull out the starter cord completely and do not release the starter from the fully extended position. This can damage the cut-off saw.

When the engine starts, quickly apply full throttle and the starter throttle catch will automatically disengage.

Stop

The engine is stopped by switching off the ignition. (Slide the stop switch to the right.)

16 – English

Page 15 Page 17
Page 16
Image 16
Husqvarna K950 manual Start and Stop, Start and stop
Page 15 Page 17

K950 specifications

The Husqvarna K950 is a robust and powerful concrete cutter designed particularly for professionals who demand high performance in heavy-duty tasks. Renowned for its precision and durability, the K950 has set a standard in the construction and demolition industries.

One of the standout features of the K950 is its engine. Powered by a reliable 2-stroke, air-cooled engine, it delivers impressive performance with a displacement of 93.6 cc. This engine provides the necessary torque and power for cutting through various materials including concrete, asphalt, and masonry effortlessly. A two-stage filtration system ensures the engine remains clean and operates efficiently, extending its service life and reducing maintenance demands.

A key technology integrated into the K950 is the SmartPower system. This innovation optimizes the engine’s power output while reducing fuel consumption and emissions, making it environmentally friendly without compromising on performance. The K950 also features a vibration dampening system connected to the handle, which significantly reduces operator fatigue during prolonged use. This ergonomic design enables greater control and comfort, enhancing safety and efficiency.

The adjustable blade guard allows for easy modifications to the cutting depth and angle, facilitating versatile usage in different applications. Operators can use blades ranging up to 14 inches in diameter, accommodating a variety of cutting requirements. This flexibility makes the K950 suitable for both small renovations and large construction projects.

The K950’s lightweight yet sturdy design increases its maneuverability on the job site. Weighing approximately 24.4 kg, it is easy to transport and handle while providing the robustness needed for rigorous cutting tasks. The easy-to-reach controls and simplified starting mechanism help ensure operational efficiency even in demanding environments.

In terms of maintenance, Husqvarna has designed the K950 for easy servicing. Its accessible components allow operators to perform routine checks and repairs with minimal downtime.

Overall, the Husqvarna K950 blends power, precision, and advanced technology, making it a top choice for professionals in the field looking for a reliable cutting tool to enhance their productivity and efficiency on any job site. Whether tackling concrete paving, road construction, or demolition tasks, the K950 stands out as a dependable and high-performing solution.
Top Page Image Contents