Sony HKDV-506A TC Output, Signal, Phase, Correction, TCG CF Flag, Off, Superimposed, Character

Item number	Item	Settable range	Function
613	TC OUTPUT	[off tape]	Specifies the signal output to the TIME CODE OUT
	SIGNAL IN	regene	connector when the internal time code generator is in a
	REGENE MODE	through	mode for regenerating the playback time code (i.e. during
			auto edit mode or when item 607. is set to int-LTC or int-
			VITC and item 606. is set to “regene”.)
			off tape: The playback time code signal is output to the
			TIME CODE OUT connector without regeneration.
			regene: The playback time code signal is output to the
			TIME CODE OUT connector after regeneration only
			when the VTR is in playback mode.
			through: The playback time code signal is output.
614	PHASE	[off]	Specifies whether the phase correction control of the LTC
	CORRECTION	on	signal generated by the time code generator is applied or
			not.
			off: The phase correction control is not applied.
			on: The phase correction control is applied.
615	TCG CF FLAG	[off]	Specfies whether the color frame (CF) flag is set (ON) or
		on	not set (OFF) in the blank bit of the time code data.
		auto	off: Color frame flag is set OFF.
			on: Color frame flag is set ON.
			auto: Color frame flag is set ON or OFF depending on the
			phase relationship of the color framing between the
			recorded video signal and the time code signal.
			Note
			When this item is set to “auto”, the color frame flag is
			determined by the operating mode of the time code
			generator.
			• When PRESET mode (i.e., item 606 is set to preset and
			the VTR is in a mode other than automatic edit mode), the
			time code signal is generated with color flame-locked to
			the video signal, and the color frame flag is ON.
			• When REGENE mode (i.e., item 606 is set to regene or
			the VTR is in automatic edit mode), color frame flag is
			OFF.
616	VITC POSITION-1	9,322 line	When an HKDV-501A (optional HD-SD Converter Board) is
	select (PAL)	.	installed and 25PsF/50i mode is selected on the VTR, this
		[19,332 line]	setting specifies the lines in which the VITC signal is
		.	inserted.
		22,335 line	It can be inserted in any lines from 9,322 to 22,335.
				Appendix
			Note
			Items 616 and 617 allow VITC to be inserted in two lines.
617	VITC POSITION-2	9,322 line	When an HKDV-501A (optional HD-SD Converter Board) is
	select (PAL)	.	installed and 25PsF/50i mode is selected on the VTR, this
		[21,334 line]	setting specifies the lines in which the VITC signal is
		.	inserted.
		22,335 line	It can be inserted in any lines from 9,322 to 22,335.
			Note
			Items 616 and 617 allow VITC to be inserted in two lines.
620	SUPERIMPOSED	[off]	Specifies whether or not to superimpose time data and
	CHARACTER	on	operating status information on the signal output from the
			MONITOR connector of HD SDI OUTPUT, the D CONV.
			OUT (OPTION) COMPOSITE (SUPER) connector and the
			3 (SUPER) connector of D CONV. SDI OUT (OPTION).
			off: No information is superimposed.
			on: Information is superimposed.

Appendix A-31