Sharp PG-A20X Gamma Gamma Correction, SRGB sRGB Setting, Signal Type Signal Type Setting

Gamma (Gamma Correction)

Gamma is an image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the bright- ness of the brighter portions.

When you are displaying images with frequent dark scenes, such as a film or concert, or when you are displaying images in a bright room, this feature makes the dark scenes easier to see and gives the impression of greater depth in the image.

Select “Gamma” on the “Picture” menu and the desired gamma mode.

Description of Gamma Modes

Selectable settings	Description
Standard	For standard image
Presentation	Brightens darker portions of image for
	more enhanced presentations.
Cinema	Gives greater depth to darker portions
	of image for a more exciting theater
	experience.
Game	For natural color gradation for playing
	a game, etc.

Note

•Gamma is not available for INPUT 1 when “sRGB” on the “Picture” menu is set to “ON”.

sRGB (sRGB Setting)

Select “sRGB” on the “Picture” menu and set

it to “ (ON)” when you want to display the image in a natural tint based on an origi- nal image.

Note

•When “sRGB” is set to “ON”;

•Gamma is not available.

•“Red”, “Blue” or “CLR Temp” on the “Picture” menu cannot be adjusted.

•For additional information about the sRGB func- tion, visit “http://www.srgb.com/”.

Info

•When “sRGB” is set to “ON”, the projected im- age may become dark, but this does not indi- cate a malfunction.

Signal Type (Signal Type Setting)

The signal type setting is preset to “Auto”; however, in rare cases a clear picture may not be displayed. In that case, select “RGB” or “Component” in accordance with the input signal.

Select “Signal Type” on the “Picture” menu and set it to “Auto”, “RGB” or “Component” for INPUT 1.

Description of Signal Type Settings

Selectable settings	Description
Auto	Input signals are automatically
	recognized as RGB or Component.
RGB	Set when RGB signals are received.
Component	Set when Component signals are
	received.

Memory (Storing and Selecting

the Adjustment Settings)		Basic
Use this function to store the adjustment settings
on the “Picture” menu. No matter which input mode		Operation
or signal type is selected, you can select and apply
the settings you have stored in a memory location.
Select “Memory” on the “Picture” menu and
the memory location where you want to store
the settings. Then adjust the setting items
on the “Picture” menu.
Description of Memory Positions
Selectable	Description
settings
Memory 1	Settings of all items on the “Picture”
Memory 2	menu can be stored in memory location.
Memory 3	The stored settings can be selected in
Memory 4	any input mode.
Memory 5
Memory OFF	Besides “Memory 1” to “Memory 5”, other
	settings on the “Picture” menu can be
	stored for each input mode. The settings
	stored in “Memory OFF” cannot be applied
	when another input mode is selected.
If you want to apply the stored settings on
the “Picture” menu, select “Memory” on the
“Picture” menu and the memory location
where you have stored the settings.

Note

•You can change the stored settings after se- lecting the memory location for those settings.

-37

PG-A20X_E_PDF_P32_39.p65 37 03.4.23, 9:57 AM