Using the “Options” Menu
You can use the “Options” menu to enhance the usage for the projector. For operation of the menu screen, see pages 32 to 35.
Example: “Options” menu screen for INPUT 2
Lamp Timer (Life) (Check-
ing the Lamp Life Status)
You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).
Display the “Options” menu to check the lamp life status.
Description of Lamp Life
Lamp usage condition | Remaining lamp life | |||
100% | 5% | |||
|
| |||
Used with only “ | ” |
| about | |
(Eco mode) in “Eco | 4,500 hours | 225 hours | ||
Mode” |
|
|
| |
Used with only “ | ” |
| about | |
(Standard mode) in | 3,000 hours | 150 hours | ||
“Eco Mode” |
|
|
|
Note
•It is recommended that the lamp be changed when the remaining lamp life becomes 5%. For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center.
•The table above indicates rough estimates in the case of using only in each mode shown. Remain- ing lamp life changes within the range of the val-
ues shown depending on the frequency at which
“Eco Mode” is switched to “” (Eco mode) and “” (Standard mode) (see page 45).
Keystone (Setting the Key- stone Correction Mode)
Select “Keystone” on the “Options” menu and the desired mode for the Keystone Correction.
Auto
Manual
Description of Keystone Correction Mode
Selectable settings | Description |
Auto | Keystone Correction is automatically |
| performed. |
Manual | Keystone Correction can be adjusted |
| manually. |
|
|
Note
•If you want to adjust the Keystone Correction manually, see page 29.
•The Keystone Correction can be adjusted up to an angle of approximately ±12˚ when the Key- stone Correction mode is set to “Auto”, or ap- proximately ±35˚ when set to “manual” (when the picture display mode is set to “NORMAL” (see page 40)).
44 | 03.4.23, 9:58 AM |