Part Names
Numbers in 
refer to the main pages in this operation manual where the topic is explained.
Projector (Front and Top View)
Power indicator
Illuminates red when the projector is in standby.
When the power is turned on, this indicator will illuminate green.
ON button
For turning the power on.
STANDBY button
For putting the projector into the standby mode.
KEYSTONE button
For entering the Keystone Correction mode.
AUTO SYNC button
For automatically adjusting images when connected to a computer.
Remote control 13 sensor
Exhaust vent 52
26
26
28
29 
39 
55Lamp indicator Illuminates green indicating normal function. Replace the lamp when the indicator illuminates red.
55Temperature warning indicator
When the internal temperature rises, this indicator will illuminate red.
27INPUT button
For switching input mode 1, 2 or 3.
27Volume buttons
For adjusting the speaker sound level or the Keystone Correction.
22Zoom knob
Foot release | 21 | 22 | Focus ring |
(on the side of |
| ||
|
|
| |
the projector) |
|
|
|
|
|
| Speaker |
Front adjustment foot 21
Attaching and removing the lens cap
•Press on the two buttons of the lens cap and attach it to the lens, then release the buttons to lock it in place.
•Press on the two buttons of the lens cap and remove it from the lens.
21 | Foot release |
21 | Front adjustment |
| foot |
53 | Air filter/cooling |
fan (Intake vent) (on the bottom of the projector)
In this operation manual, the illustration and the screen display are simplified for explanation, and may differ slightly from actual display.
-10
10 | 03.4.23, 9:55 AM |
