Sony HDW-F500, HKDV-503 PF2 Menu Factory Settings, Selecting the Audio Input Signal A-IN CH-1~CH4

4-6 PF2 Menu (Factory Settings)

Chapter 4

4-6-1 Selecting the Audio Input Signal (A-IN CH-1~CH4)

Function buttons [F1] (A-IN CH1) to [F4] (A-IN CH4) select the audio input signal for the various channels.

SDI: Selects the audio signal input through the HD SDI INPUT connector.

AES/EBU: Selectstheaudiosignalinputthroughthe AUDIO INPUT (AES/EBU) connectors.

analg:Selectstheaudiosignalinputthroughthe AUDIO INPUT connectors.

[SDTI] (OnlywhentheoptionalHKDV-506ASDTI Board is installed.): When the SDTI signal input to the SDTI (OPTION) IN connector is selected for the input video signal, the audio signal input to the SDTI (OPTION) IN connector is automatically selected for the input audio signal as well. SDTI is displayed and can not be changed.

4-6-3 Selecting the Monitor

Output Signal (MON-L SEL/MON-

R SEL)

The [F9] (MON-L SEL) and [F10] (MON-R SEL) buttons allow you to specify the audio channel to be output from the left and right MONITOR OUTPUT connectors, respectively.

1:Audio channel 1

2:Audiochannel2

3:Audiochannel3

4:Audiochannel4

5:Analogcuechannel

When multiple channels are selected for a single connector, all of the numbers are displayed.

Select the output signal to be monitored as follows:

Menu Settings

4-6-2 Setting Emphasis (EMPHASIS)

To apply emphasis to a digital audio signal that has been converted from an analog input audio signal, set the [F7] (EMPHASIS) button to on.

Making the setting

Follow the steps below to set the monitor output signal.

1 Press the [F9] (MON-L SEL) or [F10] (MON-R SEL) button.

The setting display section lights up.

2 Press numeric buttons 1 to 4 to select audio channels 1 to 4, or numeric button 5 for the analog cue channel.

Example: Pressing numeric buttons 1 and 2 selects audio channels 1 and 2, leaving audio channels 3 and 4, and the analog cue channel off.

“12...” appears in the display.

3 To set the entered audio channels, press the respective function button ([F9] or [F10]).

4-60Chapter 4 Menu Settings