Sony HKDV-502, HKDV-503 Home Menu, Selecting the Output SignalsPB/EE, Record Inhibit Mode REC INH

4-2 HOME Menu

Chapter 4 Menu Settings

4-2-1 Selecting the Output Signals(PB/EE)

The audio/video output signals from the line output and monitor output connectors can be temporarily changed from their current settings to another set of settings by pressing the [F1] (PB/EE) button. The video, digital audio, and analog cue channel output signals are toggled to the other set of settings while the button is pressed.

Output Signal Selection

Output signal selection is made using the 017.PB/EE SELECT MENU. Output signal types for different operation modes of this VTR are shown below.

Output
Channel
VTR		Video/Audio
Operation
Mode
Standby off	EE/EE		PB/MU
Standby on	PB/MU	EE/EE	EE/MU
Playback		PB/PB1)
Record	EE/EE		PB/PB
Edit	EE/EE		PB/PB
Shuttle3)	PB/MU	EE/EE	PB/PB
Jog	PB/PB		PB/MU
Variable	PB/PB		PB/MU
INPUT CHECK		INPUT2)
button

1)Output signals during playback are PB/PB only. Output signals cannot be selected with 017.PB/EE SELECT MENU.

2)When the INPUT CHECK button is held down, the INPUT signals (audio and video) are output. Output signals cannot be selected with 017.PB/EE SELECT MENU. When the INPUT signals are output, only monitor output is changed. Line output signals are not changed.

3)Pressing the [F1] (PB/EE) button changes the output signals during shuttle mode in the following ways.

VTR SETUP MENU 017. PB/ Output signals while the

EESELECT MENU settings [F1] (PB/EE) button is held down

PB/MU	EE/EE
PB/PB	EE/EE
EE/EE	PB/MU

Note

When PB/PB is selected during shuttle mode, audio output is muted for playback speeds of more than –1 or +2 times normal speed.

4-2-2 Record Inhibit Mode (REC INH)

Record inhibit mode is selected by pressing the [F2] (REC INH) button. Every time the button is pressed, the setting toggles between off and <all, crash REC, video/CTL, audio/CTL>.

The record inhibit area is selected using the 003.REC INHIBIT AREA select setting in the VTR SETUP menu.

all: All recording is prohibited. (The REC INHIBIT indicator will be lit.)

crash REC: The normal record mode is disabled. Use this setting when you want to record only during assemble editing or insert editing.

video/CTL: Video and CTL signal recording is inhibited.

Audio/CTL: Audio and CTL signal recording is inhibited.

[casst]: This is displayed when recording is inhibited because the record-protect plug is set. This setting cannot be selected.

REC INHIBIT indicator

4-16Chapter 4 Menu Settings