Sony 507D PF2 Menu Factory Settings, To activate the PF2 menu screen, Press the PF2 button

4-6 PF2 Menu (Factory Settings)

The PF2 menu is used to register frequently used menu items.

When shipped from the factory, the PF2 menu contains the adjustment menu for audio signals. If you later use the PF2 menu to register items from other menus, you can restore the PF2 menu to its original factory settings by recalling SETUP BANK F from the VTR memory banks.

For details on registration methods, see Section 4-1-3, “Registering Items to the PF1/2 Menus” on page 4-3, and on restoring factory-set menu items, see Section 4-1-4, “VTR Memory Bank Function” on page 4-4.

To activate the PF2 menu screen

Press the PF2 button.

Å - I N	REMAIN-T CH.COND		PF2
C H 1	L	113min
AES/EBU		P L A Y	L O C K
Å - I N	T C R		2 F D F 1
		00Ó 00µ 00ß 00ƒ
C H 2
AES/EBU
Å - I N	Å I N - - : - - : - - : - - Å O U T - - : - - : - - : - -
		I N - - : - - : - - : - - O U T - - : - - : - - : - -
C H 3
AES/EBU
Å - I N
C H 4
AES/EBU
		E M P H Å -	M O N - L M O N - R
		S I S	S E L	S E L
		o f f	1 _ _ _ _ _ 2 _ _ _

PF2 menu display

PF2 menu (factory settings)

Button	Indication	Function	Settings
[F1]	A-IN CH1	Selects the audio input signal for audio channel 1.		SDI, AES/EBU, analg, [SDTI]
[F2]	A-IN CH2	Selects the audio input signal for audio channel 2.
				Note
[F3]	A-IN CH3	Selects the audio input signal for audio channel 3.		When the dubbing signal input to the
[F4]	A-IN CH4	Selects the audio input signal for audio channel 4.
				SDTI (OPTION) IN connector is
				selected for the input video signal, the
				SDTI signal input to the SDTI (OPTION)
				INconnectorisautomaticallyselected
				for the input audio signal as well. The
				setting can not be changed.
[F7]	EMPHASIS	Sets the emphasis.		off,on
[F9]	MON-L SEL	Selects the monitor output signal for channel L.		Combination of	1, 2, 3, 4, 5
[F10]	MON-R SEL	Selects the monitor output signal for channel R.		Combination of	1, 2, 3, 4, 5

Chapter 4 Menu Settings

Chapter 4 Menu Settings 4-59