Sony HKDV-503, HKDV-506A Level Depend, Threshold, Detail, Ratio, Gamma Level, Video Output Data

Menu List

Appendix

Item number	Item	Settable range	Function
770	LEVEL DEPEND	0	When an HKDV-501A (optional HD-SD Converter Board) is
	THRESHOLD	.	installed, adjusts the image enhancer. Sets the luminance
	preset: 8	[8]	range for edge enhancement.
		.
		15
771	H DETAIL	2.6 MHz	When an HKDV-501A (optional HD-SD Converter Board) is
	FREQUENCY select	3.4 MHz	installed, adjusts the image enhancer. Sets the center
		[3.9 MHz]	frequency foredgeenhancement.
		4.6 MHz
772	H/V RATIO	0	When an HKDV-501A (optional HD-SD Downconverter
	preset: 3	.	Board) is installed, adjusts the image enhancer. Sets the
		[3]	horizontal to vertical ratio for edge enhancement.
		.
		7
773	GAMMA LEVEL	–128	When an HKDV-501A (optional HD-SD Converter Board) is
	preset: 0	.	installed, adjusts the image enhancer. Adjusts the gradient
		[0]	ofthecorrectioncurve.
		.
		128
775	VIDEO OUTPUT DATA	8bit	Sets the bit size of the output data from video processing
		[10bit]	(bitreductionprocessing).
			8bit: When connected to an 8-bit system
			10bit: When connected to a 10-bit system

			Notes
			• Make sure the bit length matches the destination device.
			• This setting is only active when the HD-SD converter
			output is set to D1.
776	DOWNCONVERTER	[disable]	Selects the HD-SD converter mode when the INPUT
	INPUT CHECK ENABLE	enable	CHECK button on the control panel is pressed.
			disable: The INPUT CHECK button is not linked to
			downconverteroutput.
			enable: The INPUT CHECK button is linked to
			downconverter output. When the INPUT CHECK button
			is pressed, the input signal selected by the setting in
			item 701 is output to the HD-SD converter output
			connector.

				Note
				The INPUT CHECK button works for all of the HD-SD
				converteroutputconnectors.
777	V-FILTER SELECT	[1]		Selects coefficient of thevertical interpolation filter for the
		2		HD-SD converter output. The higher the figure is, the
		3		highertheverticalresolutionis.
778	LETTER BOX MODE	[16:9]	When item 754 is set to “LETTER BOX,” this setting
		14:9	specifies the aspect ratio of the HD-SD converter output.
		13:9	16:9: The aspect ratio of the HD-SD converter output is
			16:9.
			14:9: The aspect ratio of the HD-SD converter output is
			14:9.
			13:9: The aspect ratio of the HD-SD converter output is
			13:9.

A-38Appendix