Sanyo DSR-3009P instruction manual Normal REC Mode SET menu, Normal REC Mode SET setting

RECORDING SETTING

Relationship between RECORDING AREA SET and

OVERWRITE

	<RECORDING AREA SET>						<RECORDING CONDITIONS	SET>
TOTAL CAPACITY		:		80GB		DIGITAL SERIES RECORDING		:	OFF
NORMAL RECORDING AREA		:		80	%	TOTAL NUMBER		:	1
	AREA FULL RESET	->	:	19	%
	ALARM RECORDING AREA					NORMAL RECORDING AREA
	AREA FULL RESET	->	:	1	%
	ARCHIVE AREA						OVERWRITE	:	OFF
	AREA FULL RESET	->				ALARM RECORDING AREA
CAUTION : WHEN THE AREA SETTING IS CHANGED,							OVERWRITE	:	OFF
						REMAINING DISK WARNING		:	1 %
	THE WHOLE AREA WILL BE INITIALIZED !

If the normal recording area and alarm recording area become full, select AREA FULL RESET for the normal recording area or alarm recording area in the RECORDING AREA SET menu. (See page 52.)

Note: No audio input is provided from the digital video input terminals. Audio signals can be input as analog signals via the audio input terminals (such as the MIC terminal). For details on CONNECTIONS, see page 8.

CNORMAL REC MODE SET menu

This describe how to make the settings for image quality, audio recording and recording speed for images recorded in the normal recording area. In addition, you can also specify program numbers that have been set in REC PROGRAM GROUP.

NORMAL REC MODE SET setting

MENU		<NORMAL REC MODE SET>
	PICTURE QUALITY		: ENHANCED
	AUDIO RECORDING		: OFF
	REC	RATE :	25FPS	( 11H)
	REC	PROGRAM GROUP	:	OFF

1 Press the MENU button to select RECORD SET, and then turn the shuttle dial clockwise.

The RECORD SET sub-menu appears, and the cursor moves to

RECORDING AREA SET.

2 Use the jog dial to move the cursor to NORMAL REC MODE SET, and then turn the shuttle dial clockwise.

The NORMAL REC MODE SET sub-menu appears, and the cursor is positioned at PICTURE QUALITY.

3 Turn the shuttle dial clockwise.

“ENHANCED” flashes.

Display examples: Picture quality selection

•BASIC (BQ): (15 KB)

•NORMAL (NQ): (22 KB)

•ENHANCED (EN): (30 KB)

•FINE (FI): (42 KB)

•SUPER FINE (SF): (56 KB)

4 Use the jog dial to change select the image quality (example: “SUPER FINE” ), and then turn the shuttle dial clockwise.

The cursor moves to AUDIO RECORDING.

	<NORMAL REC MODE SET>
PICTURE QUALITY		: SUPER FINE
AUDIO RECORDING		: ON		11H)
REC	RATE :	25FPS	(
REC	PROGRAM GROUP	:	OFF

5 Turn the shuttle dial clockwise, use the jog dial to set audio recording (example: “ON” ), and then turn the shuttle dial.

The cursor moves to REC RATE.

Note:

•Audio recording can be set when the REC RATE setting is from 8.33FPS to 50FPS.

•When set to “ON”, the letter “A” (audio recording indicator) appears in front of the REC RATE recording rate. This is because the audio recordings are also made in the normal recording area, so that the image recording capacity of the normal recording area is reduced.

6 Turn the shuttle dial clockwise, use the jog dial to set the recording speed (example: “0.1” ), and then turn the shuttle dial.

The cursor moves to REC PROGRAM GROUP.

Note: The field and frame recording speeds vary depending on the PICTURE QUALITY setting. Refer to the Recording speed table for details. (See page 12.)

7 Turn the shuttle dial clockwise, use the jog dial to set the program number (example: P-1), and then turn the shuttle dial clockwise.

The cursor moves to PICTURE QUALITY.

<NORMAL REC MODE SET>

PICTURE QUALITY			:	SUPER FINE
AUDIO RECORDING			:	ON
REC	RATE :	A***FPS		( 75H)
REC	PROGRAM GROUP		:	P-1

Display examples:

•OFF: Images from all cameras are recorded.

•P-1:When program no. 1 is recorded.

•P-2:When program no. 2 is recorded.

•P-3:When program no. 3 is recorded.

•P-4:When program no. 4 is recorded.

Note: When specifying a program number, carry out the settings in “PROGRAM REC SET menu”. (See page 55.)

8 Press the EXIT/OSD button.

The display returns to the normal screen.

EXIT/OSD

54 English